No | Brand | Model | Size | Location | Age | Price | Tools |
---|---|---|---|---|---|---|---|
370379 | BOBST | SP 102-E | 720x1020 mm | Africa | 1990 | upon request | show |
Autoplatine | |||||||
366845 | BOBST | SP 102-SE | 720x1020 mm | Asia | 1997 | upon request | show |
Thin Plate <> Centre Line <> Micro Matrix Adjustment System on Counter Plate. <> One Chase <> Two Plate, <> Non-stop in feeder + delivery <> Stripping frames | |||||||
366851 | BOBST | SP 102-SE | 720x1020 mm | Asia | 1994 | upon request | show |
Thin Plate <> Centre Line <> Micro Matrix Adjustment System on Counter Plate. <> One Chase <> Two Plate, <> Non-stop in feeder + delivery <> Stripping frames | |||||||
372510 | BOBST | SP 102-E | 720x1020 mm | Asia | 1986 | upon request | show |
Stripping station | |||||||
360834 | BOBST | SP 102-SE | 720x1020 mm | Asia | 2001 | upon request | show |
Steel plate in feeder <> Left hand pull lay <> Front register lay <> Center line micromatic adjustment <> Double action stripper | |||||||
366844 | BOBST | SP 102-E | 720x1020 mm | Asia | 1994 | upon request | show |
Mod. SP 102 S | |||||||
367909 | BOBST | SPO 160-S | 1600x1100 mm | Asia | 2001 | upon request | show |
Hydraulic pre-feeding table <> Auto feeder <> Die cutting section <> Delivery section with delivery table <> Chaise loader <> Stripping station | |||||||
367908 | BRAUSSE ETERNA | PE 1620 | 1620x1200 mm | Asia | 2012 | upon request | show |
Mod. PE 1620 SA-EXTRA <> LEAD EDGE FEEDER <> AUTOMATIC COUNTER STACKER <> Stripping station | |||||||
368035 | BOBST | SP 102 | 1020x720 mm | Asia | 1994 | upon request | show |
Mod. SP 102 S <> Thin Plate <> Centre Line <> One Chase <> Two Plate, <> Non-stop in feeder + delivery <> Stripping frames | |||||||
366756 | BOBST | SP 102-BMA | 720x1020 mm | East Europe | 1982 | upon request | show |
160 mln sheets <> 3 servo controlled rewind rollers <> 16 heating zones | |||||||
366754 | SBL | 1050 SE | 750x1050 mm (29 1/2" x 41-1/4") | East Europe | 2002 | upon request | show |
Standard equipment | |||||||
363891 | BOBST | SP 102-BMA | 720x1020 mm | Europe | 2000 | upon request | show |
Mod. SP102-BMA Foilmaster <> 16 Independent Heating Zones <> Quick lock centre line: <> - lateral correction: +/-0.9mm; <> - longitudinal correction: +/-0.9mm; <> Honeycomb plate/chase for hot-foil and hologram stamping - 2 set; <> Die-cutting equipment - 1 set; <> Flange system with 2 axles + 5 sets foil rolls <> (Every axles works with up to 12 foil rolls) <> Brake system <> Books and manuals <> Non-stop in feeder + delivery <> Double-sheet control | |||||||
362877 | IBERICA | LM-55 | 650x950 mm | Europe | 1986 | upon request | show |
Upgraded with touch screen pannel control <> Stripping station | |||||||
365998 | SHIHENG | SH 1060SE | 750x1060 mm | Europe | 2017 | upon request | show |
equipped with automatic carton ejector (removes all the cardboard including the clamp cardboard). | |||||||
372933 | SANWA | TRP 1060-SE | 1060x740 mm | Europe | 2006 | upon request | show |
Mod. TRP 1060 SE II <> Stripping station | |||||||
358028 | BOBST | SP 102-E EVOLINE | 720x1020 mm | Europe | 2007 | upon request | show |
CUBE (central unit bosbst electronics) <> Standard Feeder with all its equipment <> Pull lay operator side <> Non-stop device on feeder <> Micrometric system with compensation plate 3 mm and 1 mm small sheet metal <> Quick fastening female <> 1 die-cutting upper stripping frame <> 1 lower stripping frame with all its standard equipment <> Diecutting chase (fixed bottom plate) <> Non-stop delivery with grill <> Thin cutting plate system <> Centerline micrometric adjustment <> Stripping station | |||||||
370280 | WUPA | PS 6.2 | 1420x1020 mm | Europe | 1977 | upon request | show |
* fully rebuild in 1995 <> Standard equipment | |||||||
368749 | HEIDELBERG | Varimatrix 82 CS | 605x815 mm | Europe | 2013 | upon request | show |
Millimeter registration system for 1 mm plate <> Includes: 51 plate of 1 mm. <> 2 plate of 5 mm (incorporated in machine) <> 1 plate of 4 mm (incorporated in machine) | |||||||
367727 | BOBST | SP 102-BMA | 720x1020 mm | Europe | 1980 | upon request | show |
Packaging / Foiling Platen <> Mechanical speed: 3.200 sheets/hour <> Max sheet size: 720 x 1.020 mm <> Min sheet size: 350 x 400 mm <> Max embossing size: 700 x 1.010 mm <> Processable materials: 680 x 1.010 mm <> Gripper edge: 8 - 17 mm <> 12 foil Breaks Plus 6 <> 2 Plates 2 Chases | |||||||
367726 | BOBST | SP 102-E EVOLINE | 720x1020 mm | Europe | 2010 | upon request | show |
CUBE (central unit bobst electronics) <> Stripping station <> Pull lay left and right side <> Centerline micrometric adjustment <> Micrometric system with compensation plate 3 mm and 1 mm small sheet metal <> Quick fastening <> 1x Die-cutting upper stripping frame <> 1x Lower stripping frame with all its standard equipment <> Die cutting chase (fixed bottom plate) <> Quick Locking <> Non-stop feeder Non-stop delivery with grill | |||||||
369573 | BRAUSSE ETERNA | PE 1620 | 1620x1200 mm | Europe | 2015 | upon request | show |
Mod. 1620 SA Elite <> Lead edge feeder <> bundle delivery <> Stripping station | |||||||
373091 | HEIDELBERG | Promatrix 106 CS | 760x1060 mm | Europe | 2019 | upon request | show |
Mod. Promatrix 106 CSB <> Stripping station <> Blanking station <> Non-stop feeder | |||||||
369015 | BRAUSSE ETERNA | 1060 ER | Europe | 2015 | upon request | show | |
Stripping station <> Blanking station | |||||||
369971 | SANWA | TRP 1060-SE | 1060x740 mm | Europe | 1998 | upon request | show |
Continuous feeder and delivery: <> Sidelay left and right <> Cutting plates: 30 <> Chases: 1 <> Stripping pins tools with Braille. <> Electronic controls: <> Tools Manuals any spares: Some tools, and manuals <> Pre Loader | |||||||
366907 | WUPA | PS 6.3 | 1020x1420 mm | Europe | 1983 | upon request | show |
Supply section <> Die cutting section <> Stripping station | |||||||
368640 | IBERICA | AR 80 | 1020x1450 mm | Europe | 1985 | upon request | show |
2 frames <> Stripping frames | |||||||
370742 | IBERICA | AR 80 | 1020x1450 mm | Europe | 1990 | upon request | show |
Equipped to Handle E B C Flute Stock <> High Pile Feeder <> Automatic Sheet Feed <> Right & Left hand Side Lays <> 2 Active Front Lays <> Die Cutting Station <> 1 Chase 1 Plate <> Grip Edge Removal Conveyor <> Manuals & Tools <> Non-stop in delivery <> Stripping station | |||||||
370743 | IBERICA | AR 80 | 1020x1450 mm | Europe | 1989 | upon request | show |
Equipped to Handle E B C Flute Stock <> High Pile Feeder <> Automatic Sheet Feed <> Right & Left hand Side Lays <> 2 Active Front Lays <> Die Cutting Station <> 1 Chase 1 Plate <> Grip Edge Removal Conveyor <> Manuals & Tools <> Stripping station <> Non-stop in delivery | |||||||
366025 | BRAUSSE ETERNA | PE 1620 | 1620x1200 mm | Europe | 2009 | upon request | show |
Mod. Eterna PE 1620 SHC <> High pile feeder, <> stripping with extraction, <> Non-stop in delivery | |||||||
364940 | SANWA | TRP 1060-SE | 1060x740 mm | Europe | 2003 | upon request | show |
Stripping station | |||||||
368055 | HEIDELBERG | Promatrix 106 CS | 760x1060 mm | Europe | 2015 | upon request | show |
Cutting plate fine adjustment <> Electronic sheet monitoring <> Mechanical double-sheet detection <> Motorized suction head adjustment(vertical and horizontal) <> Non-Stop function at feeder and delivery <> Pile platform with motorized side pile adjustment <> Suction head for paper, board and corrugated board <> Integrated fine adjustment system for thin cutting plates <> Pull/Push side lay on both sides <> MasterSet – optical sheet alignment system <> Central adjustment system for rollers and brushes <> Sheet size adjustment with position indicators <> Sheet brake brush with motorized brake force adjustment <> Non-Stop rolling carpet <> Pneumatic flap for test sheet removal <> Processes materials as thin as 90 g/m². <> Upper Stripping Frame with quick lock and fine adjustment <> Complete with manuals and tools | |||||||
371517 | YAWA | DS 106 | 1060×750 mm | Europe | 2020 | upon request | show |
Non-stop sheet loading <> Micro adjustable side lays with pull/push in one <> 1mm thin plate <> Two independent lays with photoelectric detection <> Stripping station <> Blanking station | |||||||
370339 | BOBST | SP 102-E EVOLINE | 720x1020 mm | Europe | 2003 | upon request | show |
33,500 running hours <> Pallet feeder <> 1 o.s. and 1 o.o.s pull guide <> 2 cutting chases <> 1 cutting plate 4mm <> Centerline <> Stripping station with 1 set of frames with bars and pins <> Non-stop in delivery | |||||||
352653 | TMZ | 4500 | 900x1300 mm | Europe | 1989 | upon request | show |
Standard machine | |||||||
372995 | BOBST | SP 102-BMA | 720x1020 mm | Europe | 1992 | upon request | show |
3 shafts <> 16 heating zone <> 1 honey comb and 1 steel plate <> Non-stop in feeder + delivery | |||||||
365542 | TMZ | Unicutter 5002 | 650x920 mm | Europe | 1987 | upon request | show |
Standard equipment | |||||||
371005 | IBERICA | Speed 105 | 750x1050 mm | Europe | 2006 | upon request | show |
Direct Pallet loading <> Full complement of in-feed table furniture, <> Left hand side pull register lay with sensor, <> Touch screen, <> Automatic Non stop delivery with belt and programmable counter, <> Centre line, <> Quicklock System on chase and stripping, <> Micrometric thin plate system, <> Complement of stripping equipment <> Double action stripper <> Non-stop feeder | |||||||
370912 | YAWA | MD 1050 E | 1050×750 mm | Europe | 2001 | upon request | show |
Tork limitation on gripper bars tansmission <> Digital reading of pressure settings <> 2 form holding chases <> Quick lock system for small form <> Dual axel centering system <> 2 -5 mm cutting plate <> AUTOMATIC STRIPPING <> Double action striping <> Fast positionning of superior stripping chase with dual axel centering system <> Dual axel centering system of stripping chase and board <> Non stop delivery <> Steel loading plate <> Hight pile control by mechanical system <> Platen angle position control <> Touch screen operation control | |||||||
367907 | BRAUSSE ETERNA | ECUT 1620 | 1620x1200 mm | Europe | 2021 | upon request | show |
AUTOPLATINA DIE CUTTING <> NEW VERSION OF COUNTER-FOIL CUTTING MACHINE <> LEAD EDGE FEEDER <> AUTOMATIC COUNTER STACKER <> Stripping station | |||||||
372899 | TMZ | EST 105 | 750x1050 mm | Europe | 2002 | upon request | show |
With heating plate for die-cutting plastics <> Side register (on both sides) <> Overhauled | |||||||
372243 | IBERICA | JR-75 | 750x1050 mm | Europe | 1990 | upon request | show |
With front edge stripping device with side belt, <> Varioplan system, <> Micrometric, <> Centerline <> Non-stop in delivery | |||||||
371007 | YAWA | PE 1050 S | 750x1050 mm | Europe | 1996 | upon request | show |
Steel Plate Feeder <> 2 mm cutting plate and 1 chase <> Front Lays <> Left Hand Pull Lay <> Digifold Cutting Pressure Display <> 1 Lower sripping frame <> 2 Upper stripping frames <> Complete with Ops and Electrical Manuals <> Non-stop in delivery | |||||||
371111 | Viking | VK 1050 | 750x1050 mm | Europe | 1996 | upon request | show |
- Pile feeder <> - Infeed table with complement of infeed table furniture <> - Left hand side pull Register side lay <> - Pile delivery <> Stripping station | |||||||
369004 | BMB | 1600 | 1600x1200 mm | Europe | 2011 | upon request | show |
Security button bar <> Safety hand guard bar <> 3 different working modes: one stroke, continuous and timed continuous | |||||||
350474 | YAWA | TD 1060S | 1060×740mm | Europe | 2016 | upon request | show |
PLC and Servo Control * <> HMI with Auto Safety Check * <> Operator Friendly <> Applications Creasing, <> Die Cutting, Embossing, <> Stripping on Paper, <> Cardboard, <> Corrugated Board and Plastics etc, <> Folding Boxes, <> Labels, <> Leaflets, Book Covers, <> Hanging Tags, and More. | |||||||
332483 | WUPA | PS 4.1 | 800x1120 mm | Europe | 1972 | make offer | show |
MABEG non-stop feeder | |||||||
368842 | SANWA | TRP 1060-SE | 1060x740 mm | Europe | 1991 | upon request | show |
Steel Plate in feeder <> Mechanical Two Sheet Detector <> Push/Pull Side Lays <> Waste Removal <> c/w Chase, Thin Plate, Pins & Stripping Frame <> Steel plate in delivery <> Stripping station | |||||||
370911 | YAWA | MW 790 | 790x560 mm | Europe | 2008 | upon request | show |
Stripping station | |||||||
366026 | YAWA | TD 1060S | 1060×740mm | Europe | 2021 | upon request | show |
Long. feeding shafts: 3, <> Transversal feeding shafts: 2, <> Electrical heating system: 12 zones <> never installed, | |||||||
366253 | TMZ | Unicutter 5002 | 650x920 mm | Europe | 1987 | upon request | show |
Mod. 5002 CX - 92 <> Standard machine |