No | Brand | Model | Size | Location | Age | Price | Tools |
---|---|---|---|---|---|---|---|
370731 | HEIDELBERG | Easy 100 | 700x1000 mm | USA | 2010 | upon request | show |
Standard equipment | |||||||
371179 | SIGNATURE | Orient 110 CS | USA | 2011 | upon request | show | |
Motorized Carriers in all Sections, <> Pneumatic Feeder Lift for Easy Makeready, <> Right/Left 3rd Score Prebreak, Glue Flap Pre-Fold, <> Folding Plows for Specialty Boxes (Z-Fold, Inner Divider, Etc.), <> Minimum folding device: lower center carrier drops down and the upper carrier raises up by hydraulic controller, so the final folding carriers can close together to run very small boxes, shortening the make-ready time! It is not necessary to remove any of the carriers. <> Extended Trombone Section for Specialty Boxes, <> Pneumatic Control of Compression Section, <> Extra Wide Belts in the Final Fold Section, <> Feeder Vibrator, <> Counter Kicker, <> 4 Vacuum Feeder Belts, <> Autobottom Tooling (Various Sizes), Hanger Autobottom Boxes, <> Aftermarket Servo Drive Backfold System for 4-Corner Boxes, with an extra Back Fold Shaft In Trombone Section for Special Boxes, <> Overhead Glue Wheels, Left/Right Glue Pots, <> Extended Delivery Section with Pneumatic Pressure Control, <> 4-Gun Leary Low Pressure Glue System w/ 4 sensors, with new glue pump, <> The system has 12 channels capable of plugging in 8 glue guns and 4 quality control attachments such as: Barcode Scanner, Glue Detection, Disc Ejector, Batch Counter or Tape Application, with Touchscreen Control, <> Extra Belts, <> Many Spare Parts | |||||||
367130 | VERSOR | SK 160 K3 | 1600x1000 mm | Europe | 2012 | upon request | show |
Standard equipment | |||||||
371525 | PETRATTO | Metro | 780x780 mm | Europe | 2012 | upon request | show |
For the production of a variety of products; <> courier envelopes, <> presentation folders. <> Belt feeder, <> Continuous feeder, <> Peel and seal tape applicator, <> Tear strip attachment, <> Concertina fold, <> Pre breaking ploughs, <> Upper open folder, pocket (tipper), <> Modulo Jolly unit, <> Nordson hot melt glue system, <> Mosquito feeder inserter for CDs, <> Maps, <> Phone cards, etc, <> Cross turn unit, <> Shingle delivery unit | |||||||
355072 | VERSOR | SKF 160 K | 1600x1000 mm | Europe | 2012 | upon request | show |
Corrugated all microflute, flute B and C possible <> Computer <> Remote controls <> Some automatic settings <> Braking on every creas <> Electronic glue control,application of glue via nazzle <> StraightLine <> Lock-bottom <> 4 + 6 point glue system | |||||||
330885 | LAMINA | Glueline | 4.000 x 1.000 (4m x 1m) | Europe | 2014 | upon request | show |
Mod. Glueline 675 <> Special to make just boxes of linear folding, folding middle boxes or middle rollers <> Introducer automatic <> Exit by accumulator <> It could work with the following materials: <> Micro or corrugated cardboard with the following thicknesses: F; E; B; EE; EF; EB; FB; C y DD <> Equipped with injectors <> You can paste boxes of maximum development: 4.000 x 1.000 (4m x 1m) <> Minimum: 700 x 500 <> You can paste middle boxes or middle rollers: <> Maximum: 2.000 x 1.000 <> Minimum: 700 x 500 | |||||||
372838 | PETRATTO | Metro | 780x780 mm | Europe | 2015 | upon request | show |
This machine is fully equipped to make simple & multiple pocket & presentation straight <> folders/key cards/cd sleeves to & crash lock bottom boxes! <> Touch screen programming <> Petratto bottom fed belt feeder w/ vacuum belts <> GMS hot melt glue system w/ 4 glue guns <> 2 different fold plates for different size presentation folders <> Long 2.5 meter modular table <> Petratto shingle delivery <> 2 double sided tape heads <> Only 1.289.429 total substrates run/436 hours of usage total | |||||||
372017 | BOBST | ExpertFold 80 A1 | Europe | 2015 | upon request | show | |
- Accufeed with integrated blank aligner <> - Main gauge for longitudinal and lateral setting <> - 5 feed belts with electric pile vibrator <> - Air gauge with blower system <> - Blank suction device <> - Manual carriers <> - Upper and lower right and left conveyors <> - Lower central conveyors in pre-fold and final fold sections <> - Upper central conveyors in pre-fold and final fold sections <> - Lower left-hand gluing unit <> - Left- and right-hand pressing units <> - Motorized system of transfer section <> - Finger ejector (Bobst flipper) : for ejecting all types of boxes incl. N/F/E flute corrugated <> which do not meet quality control specifications. <> - Delivery pneumatic compression apron, pressure length: 4650 mm <> - Upgraded Nip roller option included <> - Safety pull cord E stop included <> - Guide control belt Option into carton pack hopper <> - New set of transport belts included <> Bobst Cartonpack GT <> Including accessories, tools and manuals | |||||||
354814 | SIGNATURE | RotoBraille | Europe | 2015 | upon request | show | |
Folder gluer - Braille embossing system for the blind <> High speed ejection cameras for bad boxes (where Braille letter was not embossed correctly) <> Machine has pre-makeready table <> There are 8 top and 8 bottom drums- 4 with four lines and 4 with five lines <> Detection system In-sight <> Braille <> Make ready table <> Step wedge system <> Carrier & Drive <> Feeder <> Conveyor <> Signature grinder <> A set of male and female plate <> Grinder moving unit <> Important!!! Device which is producing the tools for Braille | |||||||
369871 | PETRATTO | Metro SE 78-2 | 780x780 mm | USA | 2016 | upon request | show |
Mod. Metro SE78A <> Folder gluer for packages & pocket folders, <> upper tipper, <> crash lock device, <> 6 plows with tractors. | |||||||
371572 | MOLL | Marathon | 762x762 mm | USA | 2017 | upon request | show |
Friction Feeder <> Marathon Regal w/Dial-a-Feed <> Quadraflex w/compression table <> End-of-Line Collection Table <> Versa Fold & Stacker with Glue System | |||||||
368460 | LAMINA | GL 1800 | 1800 mm | Europe | 2017 | upon request | show |
Two gluing heads an one tape station | |||||||
370944 | KOHMANN | BrailleStar | 620 mm | Europe | 2017 | upon request | show |
Feeder with fibration, <> Braille embossing Servo driven, <> Touchscreen panel, <> Discbortom gluing, <> delvery with pressing section, | |||||||
365263 | VEGA | Polaris 110 | 1100x800 mm | Middle East | 2017 | upon request | show |
FRONTAL SQUARING DEVICE <> MECHANICAL BLANK ALIGNMENT <> 2 upper carrier by belts <> 8 Feed Belts <> Vibrator on Feeder <> Pre Fold Section <> continues suction belt for feeder <> Record sleeve <> Motorized single feed gate <> Conical box device <> Arrow Gluing System with 4 Gluing Guns <> lower Glue Tank with 5 MM wheel <> Overhead support <> Device for the glue detection <> SAI-SW-ECU-M good alternative to the computer-assisted make-ready <> 4 black gun support <> Final Fold Section <> Vega Count Control System <> Kicker/Counter <> Compression Belt Delivery <> SPEED 400 M/MIN. <> Crash lock and straight line | |||||||
368371 | BOBST | ExpertFold 80 A1 | USA | 2017 | upon request | show | |
ADDITIONAL BRAILLE SYSTEM <> With: battery vibrator. <> Box vacuum cleaner. <> Introducers and left and right pressers. <> Ejector/Flipper. Code reader. <> Position indicators. <> Pre-breakers. <> Handy Pack reception table with tapestry collection. <> Bobst electronic system. | |||||||
366960 | LAMINA | GL 1400 | 1400 mm | Europe | 2017 | upon request | show |
Glue type: 2 guns with hot melt <> Extras: 2 cold tape guns adhesive | |||||||
371324 | HEIDELBERG | Easy 100 | 700x1000 mm | USA | 2017 | upon request | show |
Automatic bottom boxes - cartons or corrugated cardboard (E-flute) up to 600 g / m2 <> Double wall boxes <> Boxes 4- / 6- corners (optional) <> 1.10 Basic Machine <> − Friction feeder with vibrator <> − Pre-bender section <> − Automatic background module <> − Bender section <> − Internal gluing unit LS (4mm glue wheel) <> − Transfer section <> − Mirror for stacking control <> − Departure section <> − Electricity requirement: 18 kW, AC 230 V, 50/60 Hz. Three phase <> − Air requirement: 6-10 bar, base machine 230 Nl / min at 6 bar <> − Touch screen <> − PLC control system <> − Pneumatic marking unit <> − Wireless control module <> OPTIONAL ACCESSORIES INCLUDED <> 2. Options for folding boxes with automatic bottom <> 2.16 3 diagonal left folding (1 long, 1 short, 1 medium) <> 5. Additional machine modules <> 5.20 Alignment module after the feeder <> Logitude: 1,200 mm, 2 bars of upper rollers with device for alignment and support <> guides (3 units) <> 6. Optional equipment for different sections <> 6.07 Milling system <> 6.08 Air blowers for cleaning belts <> 6.09 Brush to clean the feeding belts <> 6.17 Feeder with suction in 4 belts <> 6.18 Nordson gluing equipment with 3 upper injectors | |||||||
367026 | OMEGA | Allpro 110 | 1100 mm | Middle East | 2018 | upon request | show |
9 feeder belts <> Number of gluing points: 4 points <> HHS Gluing System + 5 guns <> Crashlock <> Double wall <> StraightLine | |||||||
372018 | MOLL | Sprint | 711 x 711 mm | Europe | 2018 | upon request | show |
Especially for the production of DVD box covers, capacity files and other expandable products. <> Able to produce capacity folders of many styles from 1/8” to 3/4” (5 - 19 mm) thickness. <> Comprising:- <> 'Pile Feeder' - air suction pile feeder with integral pump <> SC-2006 - automatic counter with batching <> ‘Sprint’ - box pocket folder - infeed unit with plow formers to single stop plate fold station with spaced rollers. <> ‘Sprint’ - electronic controller with various channels for programming <> ‘Dynatec-Dinamini’ - pre-melt unit with 2 x heated pipes & 2 x hot-melt gluing heads <> ‘Dial-a-Stack’ - shingle delivery table <> Including accessories and manuals. | |||||||
351238 | BOBST | Ambition 76 A1 | 760 mm | Germany | 2020 | upon request | show |
CUBE adjusting system <> Carton board: max 800 g/m2 <> Corrugated flute type: N, E, F <> Speed: 20 to 300 m/min <> Inching speed: 20 m/min <> Box sizes: <> Straight line "C": 126 to 760 mm <> Straight line "E": 60 to 800 mm <> Straight line "L": 60 to 385 <> Crash-lock bottom "C" (2): 146 to 760 mm <> Crash-lock bottom "L": 70 to 385 mm <> FEEDER Total length: 610 mm <> 6 Feed conveyors with 30 mm wide belt with 4 built-in mechanical vibrators <> 1 Thickness gauge with lateral and lengthwise setting and upper introduction rollers <> 1 Additional thickness gauge with lateral and lengthwise setting and upper introduction rollers <> 2 Side guides in two parts <> Asymmetrical and adjustable in length <> Max. pile height: 350 mm. <> 1 set of rear guides for blank support <> 1 Motor controlled by frequency variator to drive the feed belts and to put in or out of operation <> PREBREAKER SECTION total length: 2300 mm. <> 1 lower left conveyor with 43 mm wide belt <> 1 Lower right conveyor with 25 mm wide belt <> 1 Set of upper conveyors with 25 mm wide belts and lifting device <> 1 Left-hand prebreaker without belt with built-in pressing device <> Adjustable through eccentric <> Max. width of the glue flap: 30 mm <> 1 Reopening guide <> 1 Right-hand prebreaker with 30 mm belt width <> Including a system to set the prebreaking angle <> 1 Lower central supporting guide <> GLUING UNIT <> 1 Lower left-hand gluing unit with wheel and double scraper <> 1 HHS gluing system with 2 nozzles, upgradeable up to 4 <> 1 Removable glue basin <> 1 Upper guide with pressure roller <> 1 Refill bottle <> Additional options installed (with factory no.): <> A-012 Delivery, extended version <> B-012 Device for crash-lock bottom boxes without prebreaking of 3rd crease <> B-060 Device for sleeves and envelopes <> EA-015 Electric pile vibrator <> For the rear pile guides. Improves the feeding of blanks which are sticking to each other <> EA-025 Blank suction device <> EA-030 Rotary brushes <> F-020 Long upper right conveyor outlet <> G-001 Minimum folding device <> G-015 Central conveyors <> J-001 Infeed device left and right Infeed device with 30 mm belt width <> J-010 Upper pressure belt <> J-014 Additional upper pressing belt <> DX-027 Glue application system without possibility of quality assurance (maximum machine speed 300 m/min) <> K-012 Flipper ejector <> KX-012 Code reader "Stand-Alone" <> Xtend series Baumerhhs (maximum machine speed 700 m/min) <> Dismantled <> In stock | |||||||
366410 | KBA | Duran Omega Intro 110 | 1100 mm | Europe | 2020 | upon request | show |
HHS Glue System <> Crash lock and straight line <> 4 + 6 point glue system <> Cleaned and checked | |||||||
371350 | BOBST | ExpertFold 110 A2 | Europe | 2021 | upon request | show | |
Easyfeeder 4 <> Controls all functions the machine <> Up to two 15” full color, high-definition touch screens <> ACCUFEED <> Integrated blank aligner for perfect folding <> Variable-speed independent drive ensures faultless feeding of irregularly shaped cartons <> Feeds all types of material <> Pneumatic feeder ramps can be unlocked and locked at the flick of a switch, considerably cutting down setup time <> Prebreaker <> Maximum prebreaking of all boxes at high speed, regardless of material <> Extra-wide, left-hand lower belt ensures no marking <> Crash-lock module <> Processes multiple-fold packaging <> 4 & 6-corner device <> Fast set-up of all types of 4- and 6-cornered boxes <> Speeds of up to 28,000 b/h <> Cable guides for 45° panel which suit all box sizes <> Automated positioning and remote control (CSM version) for short setups <> Modulated hook trajectory for high-speed, high-quality production <> Lower gluing unit <> Oversized stainless steel glue wheel for high speed running <> Folding <> Minimum folding device for folding down to 35 mm <> Choice of left, right or simultaneous folding <> Automatic belt tensioning ensures quicker makeready <> Transfer <> Delivery <> Integrated box-stream regulator for precise stream intervals and faster running <> Automatic apron centering improves box quality and prolongs belt life <> Infeed conveyor for better control of boxes with irregular edges <> Bobst C.U.B.E positioning calculation unit <> pneumatic kicker <> Bobst quality system "Flipper" <> remote control <> GYROBOX <> This supplementary module for the EXPERTFOLD 110 revolutionizes the production of complex boxes. Rotating blanks in line between two folding processes, in one single pass, it makes the folding-gluing of complicated carton packaging quick and easy and delivers exceptional end-product quality. GYROBOX boosts the efficiency of your production process. <> CARTONPAK 4 <> High-performance packer CARTONPACK 4 automatically fills your shipping containers with folded and glued cartons. All settings and movements are motorized and MATIC for repeated box orders. <> StraightLine <> Lock-bottom <> Double wall <> 4 + 6 point glue system | |||||||
370422 | DGM | Technofold-1100-SL Gyro | 1100 mm | Europe | 2023 | upon request | show |
Step speed: 30 m/minute <> Packaging width: 160-1100 mm <> Gyro - rotating packages by 90 <> Side equation section - left/right <> Pre-breaking section <> Automatic bottom section <> Servomotors, 4/6-point rear bending system <> Lower circular gluer left/right <> KQ cold glue system with 4 guns <> Final crimping and closing section <> Broadcast section <> Ironing section with independent drive <> Pneumatic insertion rollers with SQUARING 2 alignment <> Tapping block - SPANKER <> Vacuum on the feeder + vibrator <> Camera with a monitor on display <> Machine dimensions: 17x1.88x1.5 m <> Machine weight: 9.2 tons <> Max power consumption: 26 kW <> Air: 6 bar/ max 10 m3/hour <> 4 + 6 point glue system |