No | Brand | Model | Size | Location | Age | Price | Tools |
---|---|---|---|---|---|---|---|
371179 | SIGNATURE | Orient 110 CS | USA | 2011 | upon request | show | |
Motorized Carriers in all Sections, <> Pneumatic Feeder Lift for Easy Makeready, <> Right/Left 3rd Score Prebreak, Glue Flap Pre-Fold, <> Folding Plows for Specialty Boxes (Z-Fold, Inner Divider, Etc.), <> Minimum folding device: lower center carrier drops down and the upper carrier raises up by hydraulic controller, so the final folding carriers can close together to run very small boxes, shortening the make-ready time! It is not necessary to remove any of the carriers. <> Extended Trombone Section for Specialty Boxes, <> Pneumatic Control of Compression Section, <> Extra Wide Belts in the Final Fold Section, <> Feeder Vibrator, <> Counter Kicker, <> 4 Vacuum Feeder Belts, <> Autobottom Tooling (Various Sizes), Hanger Autobottom Boxes, <> Aftermarket Servo Drive Backfold System for 4-Corner Boxes, with an extra Back Fold Shaft In Trombone Section for Special Boxes, <> Overhead Glue Wheels, Left/Right Glue Pots, <> Extended Delivery Section with Pneumatic Pressure Control, <> 4-Gun Leary Low Pressure Glue System w/ 4 sensors, with new glue pump, <> The system has 12 channels capable of plugging in 8 glue guns and 4 quality control attachments such as: Barcode Scanner, Glue Detection, Disc Ejector, Batch Counter or Tape Application, with Touchscreen Control, <> Extra Belts, <> Many Spare Parts | |||||||
359521 | BOBST | Media 100 II-A2 | South America | 1999 | upon request | show | |
It has side gluing and automatic background. <> Code bar scanner. Expulsion. <> Glue detection. <> Disc/top wheel gluing system. <> Right/left pre-breaker. <> Pneumatically controlled press station. <> Bucket system. <> Memory up to 5000 types of box templates. <> Vibrator in feeder. <> You can hit 6 tips: Adding a gun injector system (original HHS Baumer) | |||||||
372913 | BOBST | HandyPack | Europe | 1996 | upon request | show | |
HANDYPACK FOR COLLECTING FOLDED AND GLUED BOXES <> Solid board: up to 700 g/m2 <> Corrugated board: B and E | |||||||
372017 | BOBST | ExpertFold 80 A1 | Europe | 2015 | upon request | show | |
- Accufeed with integrated blank aligner <> - Main gauge for longitudinal and lateral setting <> - 5 feed belts with electric pile vibrator <> - Air gauge with blower system <> - Blank suction device <> - Manual carriers <> - Upper and lower right and left conveyors <> - Lower central conveyors in pre-fold and final fold sections <> - Upper central conveyors in pre-fold and final fold sections <> - Lower left-hand gluing unit <> - Left- and right-hand pressing units <> - Motorized system of transfer section <> - Finger ejector (Bobst flipper) : for ejecting all types of boxes incl. N/F/E flute corrugated <> which do not meet quality control specifications. <> - Delivery pneumatic compression apron, pressure length: 4650 mm <> - Upgraded Nip roller option included <> - Safety pull cord E stop included <> - Guide control belt Option into carton pack hopper <> - New set of transport belts included <> Bobst Cartonpack GT <> Including accessories, tools and manuals | |||||||
368281 | BOBST | Media 100 II-A2 | Europe | 2004 | upon request | show | |
straight line version for straight-glued boxes, crash-bottom-boxes + 4-point-boxes <> feeder vibration <> pre-brakers <> lower disc-gluing-system left <> fold-section <> crash lock bottom module <> electronic upper gluing system KAS C-800-Compact <> 4 gluing-nozzles <> max. 5 gluing-points <> sections broaching forming 2 pcs. <> pneumatic controlled press-station with exit <> CUBE center control-system with display | |||||||
371813 | BOBST | Media 100 II-A2 | USA | 2003 | upon request | show | |
4 corner by New Electronic Servo Motors <> New HSS Xact 4 channel Glue System <> Bobst Cube Control With Touch screen and Job Memory <> StraightLine <> Auto bottom <> 4-Point gluing system <> Partly overhauled | |||||||
372148 | BOBST | Media 100 II-A2 | South America | 1999 | upon request | show | |
Side gluing, automatic backing. <> Glues 4 tips. <> By adding an injector system, you can glue 6 tips, much more useful. <> Barcode reader. <> Adaptable for Microcorrugated. <> Glue detection Upper and lower carriage in final folding. Locks the lower part. <> Gluing system: upper wheel. <> Right + left pre-breaker. <> Pneumatically controlled press station. <> Vibrator: feeder. <> CUBE system: memory 5000 types. <> Cleaned and checked | |||||||
362140 | VEGA | Sirio 82 | Europe | 2002 | upon request | show | |
Automatic lock Bottom <> Inline gluing unit <> Ero hot melt glue application with 2 Glue guns (System prepared to receive 4 Glue guns) <> Vega Count device <> Semi Automatic collector Pack 44, for the manual packing of boxes produced | |||||||
372979 | BOBST | ExpertFold 110 A2 | Europe | 2010 | upon request | show | |
4 corner, feeder with vacuum, tooth gauge and vibrator, <> Accufeed (aligning right / left after the feeder), prefolding section r / l with additional upper and lower middle transport, lower disc glue station left, sleeves and envelope equipment, HHS X-tend² glue gun system, <> 8 channels 4 guns, <> high pressure, quality system with glue gun control and linear ejector, <> lock bottom module A2 with additional upper and lower middle transport, <> brandnew servo drive backfolding solution with touchscreen (Stöber) press units left / right, <> digital positioning units, <> folding section with additional upper and lower central transport, <> Bobst C.U.B.E control, <> pneumatic kicker, <> squaring station at press station, <> pneumatic, <> extended press station, <> length 6535 mm, <> approx. 26.000 production hours. <> Reconditioning 2024: cleaned, checked, repainted, new feeder, transport and press belts. <> StraightLine <> Lock-bottom <> Double wall | |||||||
368371 | BOBST | ExpertFold 80 A1 | USA | 2017 | upon request | show | |
ADDITIONAL BRAILLE SYSTEM <> With: battery vibrator. <> Box vacuum cleaner. <> Introducers and left and right pressers. <> Ejector/Flipper. Code reader. <> Position indicators. <> Pre-breakers. <> Handy Pack reception table with tapestry collection. <> Bobst electronic system. | |||||||
371350 | BOBST | ExpertFold 110 A2 | Europe | 2021 | upon request | show | |
Easyfeeder 4 <> Controls all functions the machine <> Up to two 15” full color, high-definition touch screens <> ACCUFEED <> Integrated blank aligner for perfect folding <> Variable-speed independent drive ensures faultless feeding of irregularly shaped cartons <> Feeds all types of material <> Pneumatic feeder ramps can be unlocked and locked at the flick of a switch, considerably cutting down setup time <> Prebreaker <> Maximum prebreaking of all boxes at high speed, regardless of material <> Extra-wide, left-hand lower belt ensures no marking <> Crash-lock module <> Processes multiple-fold packaging <> 4 & 6-corner device <> Fast set-up of all types of 4- and 6-cornered boxes <> Speeds of up to 28,000 b/h <> Cable guides for 45° panel which suit all box sizes <> Automated positioning and remote control (CSM version) for short setups <> Modulated hook trajectory for high-speed, high-quality production <> Lower gluing unit <> Oversized stainless steel glue wheel for high speed running <> Folding <> Minimum folding device for folding down to 35 mm <> Choice of left, right or simultaneous folding <> Automatic belt tensioning ensures quicker makeready <> Transfer <> Delivery <> Integrated box-stream regulator for precise stream intervals and faster running <> Automatic apron centering improves box quality and prolongs belt life <> Infeed conveyor for better control of boxes with irregular edges <> Bobst C.U.B.E positioning calculation unit <> pneumatic kicker <> Bobst quality system "Flipper" <> remote control <> GYROBOX <> This supplementary module for the EXPERTFOLD 110 revolutionizes the production of complex boxes. Rotating blanks in line between two folding processes, in one single pass, it makes the folding-gluing of complicated carton packaging quick and easy and delivers exceptional end-product quality. GYROBOX boosts the efficiency of your production process. <> CARTONPAK 4 <> High-performance packer CARTONPACK 4 automatically fills your shipping containers with folded and glued cartons. All settings and movements are motorized and MATIC for repeated box orders. <> StraightLine <> Lock-bottom <> Double wall <> 4 + 6 point glue system | |||||||
371535 | BOBST | HandyPack | Middle East | 2000 | upon request | show | |
HANDYPACK FOR COLLECTING FOLDED AND GLUED BOXES <> Solid board: up to 700 g/m2 <> Corrugated board: B and E | |||||||
364297 | BOBST | Media 100 II-A2 | Europe | 2004 | upon request | show | |
Linear gluing <> Double gluing <> Glued 4 and 6 points with servo positioning <> Solid cardboard 100-600 g/m2 <> Corrugated up to flute "E" maximum thickness 8 mm <> Operating speed 20 - 300 m/min <> Drive system slow forward speed 20 m/min <> Vibrator in feeder <> Pre-bending section <> Double-sided tape applicator "apr" <> Bobst Computer Setup <> Electronic counter <> 2 Nordson hotmelt / pur injector gluing equipment <> Compression conveyor <> Lock-bottom | |||||||
373111 | ROPI | UKM 380 | Europe | 2003 | upon request | show | |
HHS gluer with nozzles <> Control from the desktop <> Pressure belt and additional delivery with a double-sided tape dispenser. <> Folding pocket <> Supports small formats | |||||||
354814 | SIGNATURE | RotoBraille | Europe | 2015 | upon request | show | |
Folder gluer - Braille embossing system for the blind <> High speed ejection cameras for bad boxes (where Braille letter was not embossed correctly) <> Machine has pre-makeready table <> There are 8 top and 8 bottom drums- 4 with four lines and 4 with five lines <> Detection system In-sight <> Braille <> Make ready table <> Step wedge system <> Carrier & Drive <> Feeder <> Conveyor <> Signature grinder <> A set of male and female plate <> Grinder moving unit <> Important!!! Device which is producing the tools for Braille | |||||||
354649 | JAGENBERG | Diana 925 | 925 mm | Europe | 1980 | upon request | show |
Mod. Jagenberg Diana 925-I <> Maximum Speed: Standard Boxes 370 m per Min. <> Self-Locking Bottom 200 m per Min. <> Four-Point Gluing 130 m per Min. <> Gluing Self-Locking Bottom <> NORDSON gluing unit available <> 4 + 6 point glue system <> Dismantled | |||||||
368641 | JAGENBERG | Diana 925 | 925 mm | Europe | 1984 | upon request | show |
* full overhauled in 2006, <> 4 gluing jets + 1 gluing disc, <> milling knife, | |||||||
367025 | VEGA | Polaris 90 | 920 mm | Middle East | 2009 | upon request | show |
STRAIGHT FOLD <> FRONTAL SQUARING DEVICE <> MECHANICAL BLANK ALIGNMENT <> 2 upper carriers by belts <> 8 Feed Belts <> Vibrator on Feeder <> Pre Fold Section <> continues suction belt for feeder <> Record sleeve <> Motorized single feed gate <> Conical box device <> HHS Gluing System with 4 Gluing Guns <> lower Glue Tank with 5 MM wheel <> Overhead support <> Device for the glue detection <> SAI-SW-ECU-M good alternative to the computer assisted make-ready <> 4 black gun support <> Final Fold Section <> Vega Count Control System <> Kicker/Counter <> Compression Belt Delivery <> SPEED 400 M/MIN. <> Crashlock | |||||||
367955 | JAGENBERG | Diana 90-2 | 915 mm | Europe | 1993 | upon request | show |
Sling feeder - <> pre breaker - <> lower disc gluing system left Glue from wheel only glue control system hhs <> StraightLine <> Lock-bottom <> Counter | |||||||
360390 | JAGENBERG | Diana 90-1 | 915 mm | Europe | 1988 | upon request | show |
HSS Code Reader <> HSS Gluing Unit <> HSS Gluing Unit with 3 Cold Glue Guns <> Lock Bottom <> Straight Line <> 3 Point Gluing <> Lower Disc Gluing System Left <> Pre-Fold Section | |||||||
371511 | JAGENBERG | Diana 90-2 | 915 mm | Europe | 1993 | upon request | show |
4 x Längsleimung, automatischer Boden | |||||||
362763 | JAGENBERG | Diana Pro 114 | 900x1140 mm | Europe | 2004 | upon request | show |
Heidelberg Diana pro 114 <> For 1,2,3,4 corner boxes. <> Valco gluing system with 7 guns Disc gluing unit Auto set <> Many optional equipment for different box types. | |||||||
366251 | BOBST | Domino 90 | 900 mm | Europe | 1990 | upon request | show |
equipped with frame with upper glue wheels <> StraightLine <> Cleaned and checked | |||||||
364648 | BOBST | Domino 90 | 900 mm | Europe | 1987 | upon request | show |
Model Domino 90 Matic <> Tracking System (Optiona BOBST) <> HHS gluing device with 3 guns <> Straight-line gluing <> Please note pictures are from the old (grey floor) and new location (red floor) <> Double wall <> Lock-bottom | |||||||
358320 | BOBST | Domino 90 | 900 mm | Europe | 1995 | upon request | show |
Fixings - 15 pcs. <> Extension rods - 15 pieces (different lengths) <> Stacking supports - 2 pieces <> Terminal blocks (with adjustable angle) 10 pcs. <> Upper bars - 4 pcs. <> Lower poles - 2 pcs (one for each section) <> Assembly screws (for fastening the elements on the assembly line) - 4 pcs. <> Wires (for bending the punched panels) - 4 pcs. <> Folding knife - 3 pieces (left and right for folding and right for pre-breaking) <> Adhesive flap bender on the left <> Lower adhesive system with wheel 3mm thick (adhesive wheel, collector, inkwell, cylinder and cover with upper pressure wheel) <> 5 cranks for machine setting <> Conveyor belt tensioner <> Conveyor belts - for most trolleys 1-3 each | |||||||
362789 | BOBST | Domino 90 | 900 mm | Europe | 1995 | upon request | show |
Glue system KAS 800 with 3 glue guns <> Kicker <> Straightline gluing <> Delivery | |||||||
367953 | BOBST | Domino 90 | 900 mm | Europe | 1995 | upon request | show |
3 point <> Insertion station <> Alignment station <> Pre-crushing station <> Top-gluing station <> Combi Folder <> Under glue station <> Folding station <> Press station <> Transfer station <> Press carpet (delivery) <> HHS, <> 4 glue spraying heads with glue seam control (ULT 300 ) <> Crash lock and straight line | |||||||
371101 | BOBST | Domino 90 | 900 mm | Europe | 1986 | upon request | show |
Ca. 37.500 hours <> Vibration motor at feeder <> Counter kicker after trombone section <> Compression section <> including blue sponge belt <> Gluing disc – Bobst <> 2 glue guns for crash lock. <> Of which 1 NEW gun <> as well as hooks and gluing guns for crash lock bottom <> Full documentation with spare parts, maintenance manual, <> electric diagram <> StraightLine | |||||||
367045 | BOBST | Domino 90 | 900 mm | Europe | 1988 | upon request | show |
ERO system, <> 8 Chanels, <> 3 guns <> StraightLine <> Lock-bottom <> Double wall | |||||||
316633 | JAGENBERG | Simplex Universal 875 | 875 mm | Europe | 1987 | upon request | show |
Model: Simplex Universal 875-2 <> Double handrail <> It can die: cardboard and micro corrugated board <> Completely electrically and mechanically checked <> StraightLine <> Lock-bottom <> 4-Point gluing system | |||||||
366843 | BOBST | Domino 85 M | 850 mm | Asia | 1990 | upon request | show |
4 folder with Lock button <> One Hot-melt Glue <> 2 sets cold glue | |||||||
354179 | BOBST | Domino 85 M | 850 mm | Europe | 1989 | upon request | show |
BOBST Domino 85-M Pasting Machine (Folder-gluer 4-6 points) <> Convertible stock Solid up to 700 g/m2 <> Corrugated cardboard up to B flute <> Max thickness of the finished product: 15 mm <> Sizes: standard boxes (blanks open) Width max 850 mm - Width min 56 mm <> Length max 800 mm - min 60 mm <> Drive System Inching speed 8 m/min <> Operating speed 20 - 400 m/min <> Crash lock bottom device <> Special version for 4/6 corner gluing <> HHS gluing system with 3 guns <> N. 2 gluing points with disc system <> Double belt pressing system on delivery <> Handy Pack system after delivery, available but not installed <> Main motor 21 kW <> Connected power supply 40 kVA / 380V <> Dimensions Length 14120 (15550 mm with Handy Pack) - width 2200 mm | |||||||
366216 | GRASSI | Studio 80 | 800 mm | Europe | 1984 | upon request | show |
Folder gluer GRASSI Studio 80 <> * Completely overhauled <> Gluing stretched, microwave, standard cases and automatic bottom <> Maximum open box size: 800 mm <> Four glue points mod. Zator with 3 spray guns | |||||||
365845 | GRASSI | Studio 80 | 800 mm | Europe | 1989 | upon request | show |
-Ideal for stretched and corrugated cardboard (up to low wave) <> -With pre-folding device <> -Gluing: with one lower tank and 2 upper wheels for automatic lock bottom or can be installed an automatic HHS hot glue system with spray guns <> -Machine dimensions: length mt. 12 ( without stacker ) - width mt. 1.50 <> -Grassi stacker in delivery | |||||||
369161 | GRASSI | Studio 80 | 800 mm | Europe | 1995 | upon request | show |
Maximum open box size: 800 mm <> Automatic lock bottom <> Code reader <> Ejector <> Ideal for stretched and corrugated cardboard | |||||||
369871 | PETRATTO | Metro SE 78-2 | 780x780 mm | USA | 2016 | upon request | show |
Mod. Metro SE78A <> Folder gluer for packages & pocket folders, <> upper tipper, <> crash lock device, <> 6 plows with tractors. | |||||||
366468 | PETRATTO | Metro | 780x780 mm | USA | 2004 | upon request | show |
Standard equipment | |||||||
372838 | PETRATTO | Metro | 780x780 mm | Europe | 2015 | upon request | show |
This machine is fully equipped to make simple & multiple pocket & presentation straight <> folders/key cards/cd sleeves to & crash lock bottom boxes! <> Touch screen programming <> Petratto bottom fed belt feeder w/ vacuum belts <> GMS hot melt glue system w/ 4 glue guns <> 2 different fold plates for different size presentation folders <> Long 2.5 meter modular table <> Petratto shingle delivery <> 2 double sided tape heads <> Only 1.289.429 total substrates run/436 hours of usage total | |||||||
371525 | PETRATTO | Metro | 780x780 mm | Europe | 2012 | upon request | show |
For the production of a variety of products; <> courier envelopes, <> presentation folders. <> Belt feeder, <> Continuous feeder, <> Peel and seal tape applicator, <> Tear strip attachment, <> Concertina fold, <> Pre breaking ploughs, <> Upper open folder, pocket (tipper), <> Modulo Jolly unit, <> Nordson hot melt glue system, <> Mosquito feeder inserter for CDs, <> Maps, <> Phone cards, etc, <> Cross turn unit, <> Shingle delivery unit | |||||||
365670 | MOLL | Marathon | 762x762 mm | Europe | 1997 | upon request | show |
Dial-a-Feed' air suction pile feeder with integral pump <> Infeed table with plow formers & guides <> ‘Tru-Count’ Automatic counter with batching <> ‘Quadraplex’ glue control unit with 4 channels for up to 4 gluing heads with electronic cut-off control <> PVA pressurized cold glue unit with 2 x gluing heads <> ‘Marathon’ Pocket Fold unit with; <> - Upper & lower buckle plate fold station and segmented rollers <> ‘Dial-a-Stack’ shingle delivery table <> Also including; <> ‘Bump n Turn’ unit allows the product to be turned & folded in another direction <> ‘Final Fold’ unit creates an in-line final fold in an upward or downward format with rollers & formers <> Including accessories and manuals. | |||||||
372019 | MOLL | Marathon | 762x762 mm | Europe | 1999 | upon request | show |
'Dial-a-Feed' hopper friction feeder with belts <> Infeed table with plough formers & guides <> ‘Tru-Count’ automatic counter with batching <> ‘Quadraplex’ glue control unit with 4 channels for up to 4 gluing heads with electronic cut-off control <> Gluing options of: <> ‘Dynatec’ pre-melt unit with 2 x heated pipes & hot-melt gluing heads or, <> PVA pressurized cold glue unit with 2 x gluing heads <> ‘Marathon’ Pocket Fold unit with; <> Upper & lower buckle plate fold station and segmented rollers <> 'Dial-a-Stack' compression stream delivery conveyor <> Including accessories and manuals. | |||||||
371572 | MOLL | Marathon | 762x762 mm | USA | 2017 | upon request | show |
Friction Feeder <> Marathon Regal w/Dial-a-Feed <> Quadraflex w/compression table <> End-of-Line Collection Table <> Versa Fold & Stacker with Glue System | |||||||
351238 | BOBST | Ambition 76 A1 | 760 mm | Germany | 2020 | upon request | show |
CUBE adjusting system <> Carton board: max 800 g/m2 <> Corrugated flute type: N, E, F <> Speed: 20 to 300 m/min <> Inching speed: 20 m/min <> Box sizes: <> Straight line "C": 126 to 760 mm <> Straight line "E": 60 to 800 mm <> Straight line "L": 60 to 385 <> Crash-lock bottom "C" (2): 146 to 760 mm <> Crash-lock bottom "L": 70 to 385 mm <> FEEDER Total length: 610 mm <> 6 Feed conveyors with 30 mm wide belt with 4 built-in mechanical vibrators <> 1 Thickness gauge with lateral and lengthwise setting and upper introduction rollers <> 1 Additional thickness gauge with lateral and lengthwise setting and upper introduction rollers <> 2 Side guides in two parts <> Asymmetrical and adjustable in length <> Max. pile height: 350 mm. <> 1 set of rear guides for blank support <> 1 Motor controlled by frequency variator to drive the feed belts and to put in or out of operation <> PREBREAKER SECTION total length: 2300 mm. <> 1 lower left conveyor with 43 mm wide belt <> 1 Lower right conveyor with 25 mm wide belt <> 1 Set of upper conveyors with 25 mm wide belts and lifting device <> 1 Left-hand prebreaker without belt with built-in pressing device <> Adjustable through eccentric <> Max. width of the glue flap: 30 mm <> 1 Reopening guide <> 1 Right-hand prebreaker with 30 mm belt width <> Including a system to set the prebreaking angle <> 1 Lower central supporting guide <> GLUING UNIT <> 1 Lower left-hand gluing unit with wheel and double scraper <> 1 HHS gluing system with 2 nozzles, upgradeable up to 4 <> 1 Removable glue basin <> 1 Upper guide with pressure roller <> 1 Refill bottle <> Additional options installed (with factory no.): <> A-012 Delivery, extended version <> B-012 Device for crash-lock bottom boxes without prebreaking of 3rd crease <> B-060 Device for sleeves and envelopes <> EA-015 Electric pile vibrator <> For the rear pile guides. Improves the feeding of blanks which are sticking to each other <> EA-025 Blank suction device <> EA-030 Rotary brushes <> F-020 Long upper right conveyor outlet <> G-001 Minimum folding device <> G-015 Central conveyors <> J-001 Infeed device left and right Infeed device with 30 mm belt width <> J-010 Upper pressure belt <> J-014 Additional upper pressing belt <> DX-027 Glue application system without possibility of quality assurance (maximum machine speed 300 m/min) <> K-012 Flipper ejector <> KX-012 Code reader "Stand-Alone" <> Xtend series Baumerhhs (maximum machine speed 700 m/min) <> Dismantled <> In stock | |||||||
368644 | VEGA | 750 | 750 mm | Europe | 2009 | upon request | show |
3 gluing points machine | |||||||
373238 | BOBST | Alpina 75 | 750 mm | Europe | 1999 | upon request | show |
Mod. Alpina 75 MOT / A2 <> Rejection module: Flipper ejector feeder with own drive Vibrator at feeder tooth gauge at feeder <> Prebreaker: Left & right <> Lower disc gluing system: <> Left Electronic upper gluing station <> Upper disc gluing system by: Robatec Channels: 8 with 6 guns <> Code reader by: HHS Xtend <> Kicker <> Flipper Additional middle transport in folding station <> Video control in transfer station <> Remote control <> Bobst Cube steering <> Pneumatic press station <> Lock-bottom <> StraightLine <> Double wall | |||||||
364070 | VEGA | 750 | 750 mm | Europe | 1997 | upon request | show |
VEGA 750 + VEGA 6A (4 corners) and Vega collator in delivery | |||||||
368643 | INRAMIK | Vesta 750 | 750 mm | Europe | 2009 | upon request | show |
6 gluing points, <> 3 discs, <> 4 jets, <> Nordson WM408 station | |||||||
370837 | VEGA | 750 | 750 mm | Europe | 1997 | upon request | show |
gluing points(up): 4 <> gluing points(down): 1 <> gluing with disc (4 up and 1 down) <> Crash lock and straight line | |||||||
371054 | JAGENBERG | Diana 74-1 | 740 mm | Middle East | 2001 | upon request | show |
Belt feeder with 7 belts <> prefold section <> Lower left glue wheel & pot <> Final fold section <> Counter with kicker <> Compression station <> StraightLine | |||||||
363067 | BOBST | Domino 72 | 720 mm | USA | 1985 | make offer | show |
Standard machine <> Auto bottom |