No | Brand | Model | Size | Location | Age | Price | Tools |
---|---|---|---|---|---|---|---|
368643 | INRAMIK | Vesta 750 | 750 mm | Europe | 2009 | upon request | show |
6 gluing points, <> 3 discs, <> 4 jets, <> Nordson WM408 station | |||||||
373111 | ROPI | UKM 380 | Europe | 2003 | upon request | show | |
HHS gluer with nozzles <> Control from the desktop <> Pressure belt and additional delivery with a double-sided tape dispenser. <> Folding pocket <> Supports small formats | |||||||
370422 | DGM | Technofold-1100-SL Gyro | 1100 mm | Europe | 2023 | upon request | show |
Step speed: 30 m/minute <> Packaging width: 160-1100 mm <> Gyro - rotating packages by 90 <> Side equation section - left/right <> Pre-breaking section <> Automatic bottom section <> Servomotors, 4/6-point rear bending system <> Lower circular gluer left/right <> KQ cold glue system with 4 guns <> Final crimping and closing section <> Broadcast section <> Ironing section with independent drive <> Pneumatic insertion rollers with SQUARING 2 alignment <> Tapping block - SPANKER <> Vacuum on the feeder + vibrator <> Camera with a monitor on display <> Machine dimensions: 17x1.88x1.5 m <> Machine weight: 9.2 tons <> Max power consumption: 26 kW <> Air: 6 bar/ max 10 m3/hour <> 4 + 6 point glue system | |||||||
371181 | BRAUSSE | TA1100 C6 | 1100 mm | USA | 2004 | upon request | show |
HHS Controller with 3 Glue Guns, <> Lower Left Glue Pot <> StraightLine <> Auto bottom | |||||||
366216 | GRASSI | Studio 80 | 800 mm | Europe | 1984 | upon request | show |
Folder gluer GRASSI Studio 80 <> * Completely overhauled <> Gluing stretched, microwave, standard cases and automatic bottom <> Maximum open box size: 800 mm <> Four glue points mod. Zator with 3 spray guns | |||||||
369161 | GRASSI | Studio 80 | 800 mm | Europe | 1995 | upon request | show |
Maximum open box size: 800 mm <> Automatic lock bottom <> Code reader <> Ejector <> Ideal for stretched and corrugated cardboard | |||||||
365845 | GRASSI | Studio 80 | 800 mm | Europe | 1989 | upon request | show |
-Ideal for stretched and corrugated cardboard (up to low wave) <> -With pre-folding device <> -Gluing: with one lower tank and 2 upper wheels for automatic lock bottom or can be installed an automatic HHS hot glue system with spray guns <> -Machine dimensions: length mt. 12 ( without stacker ) - width mt. 1.50 <> -Grassi stacker in delivery | |||||||
365846 | GRASSI | Studio 60 | 600 mm | Europe | 1998 | upon request | show |
-With pre-folding device <> -Gluing: Automatic Ero cold glue system with 3 spray guns ( 1 for linear and 2 for pre fold boxes as envelopes, bellows boxes or similars ) | |||||||
372018 | MOLL | Sprint | 711 x 711 mm | Europe | 2018 | upon request | show |
Especially for the production of DVD box covers, capacity files and other expandable products. <> Able to produce capacity folders of many styles from 1/8” to 3/4” (5 - 19 mm) thickness. <> Comprising:- <> 'Pile Feeder' - air suction pile feeder with integral pump <> SC-2006 - automatic counter with batching <> ‘Sprint’ - box pocket folder - infeed unit with plow formers to single stop plate fold station with spaced rollers. <> ‘Sprint’ - electronic controller with various channels for programming <> ‘Dynatec-Dinamini’ - pre-melt unit with 2 x heated pipes & 2 x hot-melt gluing heads <> ‘Dial-a-Stack’ - shingle delivery table <> Including accessories and manuals. | |||||||
355072 | VERSOR | SKF 160 K | 1600x1000 mm | Europe | 2012 | upon request | show |
Corrugated all microflute, flute B and C possible <> Computer <> Remote controls <> Some automatic settings <> Braking on every creas <> Electronic glue control,application of glue via nazzle <> StraightLine <> Lock-bottom <> 4 + 6 point glue system | |||||||
367130 | VERSOR | SK 160 K3 | 1600x1000 mm | Europe | 2012 | upon request | show |
Standard equipment | |||||||
362140 | VEGA | Sirio 82 | Europe | 2002 | upon request | show | |
Automatic lock Bottom <> Inline gluing unit <> Ero hot melt glue application with 2 Glue guns (System prepared to receive 4 Glue guns) <> Vega Count device <> Semi Automatic collector Pack 44, for the manual packing of boxes produced | |||||||
371721 | VEGA | Sirio 102 | 1020 mm | Europe | 2003 | upon request | show |
8 Feeder Belts <> Vibrator on feeder <> Crash lock and straight line <> 4 + 6 point glue system <> Double wall | |||||||
316633 | JAGENBERG | Simplex Universal 875 | 875 mm | Europe | 1987 | upon request | show |
Model: Simplex Universal 875-2 <> Double handrail <> It can die: cardboard and micro corrugated board <> Completely electrically and mechanically checked <> StraightLine <> Lock-bottom <> 4-Point gluing system | |||||||
354814 | SIGNATURE | RotoBraille | Europe | 2015 | upon request | show | |
Folder gluer - Braille embossing system for the blind <> High speed ejection cameras for bad boxes (where Braille letter was not embossed correctly) <> Machine has pre-makeready table <> There are 8 top and 8 bottom drums- 4 with four lines and 4 with five lines <> Detection system In-sight <> Braille <> Make ready table <> Step wedge system <> Carrier & Drive <> Feeder <> Conveyor <> Signature grinder <> A set of male and female plate <> Grinder moving unit <> Important!!! Device which is producing the tools for Braille | |||||||
367025 | VEGA | Polaris 90 | 920 mm | Middle East | 2009 | upon request | show |
STRAIGHT FOLD <> FRONTAL SQUARING DEVICE <> MECHANICAL BLANK ALIGNMENT <> 2 upper carriers by belts <> 8 Feed Belts <> Vibrator on Feeder <> Pre Fold Section <> continues suction belt for feeder <> Record sleeve <> Motorized single feed gate <> Conical box device <> HHS Gluing System with 4 Gluing Guns <> lower Glue Tank with 5 MM wheel <> Overhead support <> Device for the glue detection <> SAI-SW-ECU-M good alternative to the computer assisted make-ready <> 4 black gun support <> Final Fold Section <> Vega Count Control System <> Kicker/Counter <> Compression Belt Delivery <> SPEED 400 M/MIN. <> Crashlock | |||||||
365263 | VEGA | Polaris 110 | 1100x800 mm | Middle East | 2017 | upon request | show |
FRONTAL SQUARING DEVICE <> MECHANICAL BLANK ALIGNMENT <> 2 upper carrier by belts <> 8 Feed Belts <> Vibrator on Feeder <> Pre Fold Section <> continues suction belt for feeder <> Record sleeve <> Motorized single feed gate <> Conical box device <> Arrow Gluing System with 4 Gluing Guns <> lower Glue Tank with 5 MM wheel <> Overhead support <> Device for the glue detection <> SAI-SW-ECU-M good alternative to the computer-assisted make-ready <> 4 black gun support <> Final Fold Section <> Vega Count Control System <> Kicker/Counter <> Compression Belt Delivery <> SPEED 400 M/MIN. <> Crash lock and straight line | |||||||
372149 | BOBST | PCR 1280 | 1280x630 mm | South America | 1972 | upon request | show |
With pre-creasing: strokes 1 and 3. <> Automatic side and bottom gluing. <> Bottom rotating tailpiece. <> Bottom rectifier armed at the exit. <> Mechanical speed variator: closing folding belts. <> No upper disc tailstock. <> Nordson cold glue gun equipment does not work, <> Or put new German HHS. <> Glues corrugated boxes wave B, up to 8mm and up to 700 g/m2. <> reconditioned in 2013. <> Does complex jobs: because of its 8cm straps it folds everything. <> Glues wine boxes of 6 units, which then go through an automatic packaging machine, and cushioning boxes. | |||||||
349547 | VEGA | Orion 42 | 420 mm | Europe | 1999 | upon request | show |
Totally overhauled <> Standard machine <> Crash lock and straight line | |||||||
371179 | SIGNATURE | Orient 110 CS | USA | 2011 | upon request | show | |
Motorized Carriers in all Sections, <> Pneumatic Feeder Lift for Easy Makeready, <> Right/Left 3rd Score Prebreak, Glue Flap Pre-Fold, <> Folding Plows for Specialty Boxes (Z-Fold, Inner Divider, Etc.), <> Minimum folding device: lower center carrier drops down and the upper carrier raises up by hydraulic controller, so the final folding carriers can close together to run very small boxes, shortening the make-ready time! It is not necessary to remove any of the carriers. <> Extended Trombone Section for Specialty Boxes, <> Pneumatic Control of Compression Section, <> Extra Wide Belts in the Final Fold Section, <> Feeder Vibrator, <> Counter Kicker, <> 4 Vacuum Feeder Belts, <> Autobottom Tooling (Various Sizes), Hanger Autobottom Boxes, <> Aftermarket Servo Drive Backfold System for 4-Corner Boxes, with an extra Back Fold Shaft In Trombone Section for Special Boxes, <> Overhead Glue Wheels, Left/Right Glue Pots, <> Extended Delivery Section with Pneumatic Pressure Control, <> 4-Gun Leary Low Pressure Glue System w/ 4 sensors, with new glue pump, <> The system has 12 channels capable of plugging in 8 glue guns and 4 quality control attachments such as: Barcode Scanner, Glue Detection, Disc Ejector, Batch Counter or Tape Application, with Touchscreen Control, <> Extra Belts, <> Many Spare Parts | |||||||
366304 | BOBST | O-Mega 160 | 1600 mm | Europe | 1982 | upon request | show |
Glue type HHS cold glue with 3 nozzles <> Cardboard thicknesses: EB, BC, C, B, EE, E <> Longitudinal seam <> Types of boxes that can be made 4 corners, 6 corners, junction, self-supporting bottom, reinforced self-supporting bottom | |||||||
369871 | PETRATTO | Metro SE 78-2 | 780x780 mm | USA | 2016 | upon request | show |
Mod. Metro SE78A <> Folder gluer for packages & pocket folders, <> upper tipper, <> crash lock device, <> 6 plows with tractors. | |||||||
372838 | PETRATTO | Metro | 780x780 mm | Europe | 2015 | upon request | show |
This machine is fully equipped to make simple & multiple pocket & presentation straight <> folders/key cards/cd sleeves to & crash lock bottom boxes! <> Touch screen programming <> Petratto bottom fed belt feeder w/ vacuum belts <> GMS hot melt glue system w/ 4 glue guns <> 2 different fold plates for different size presentation folders <> Long 2.5 meter modular table <> Petratto shingle delivery <> 2 double sided tape heads <> Only 1.289.429 total substrates run/436 hours of usage total | |||||||
371525 | PETRATTO | Metro | 780x780 mm | Europe | 2012 | upon request | show |
For the production of a variety of products; <> courier envelopes, <> presentation folders. <> Belt feeder, <> Continuous feeder, <> Peel and seal tape applicator, <> Tear strip attachment, <> Concertina fold, <> Pre breaking ploughs, <> Upper open folder, pocket (tipper), <> Modulo Jolly unit, <> Nordson hot melt glue system, <> Mosquito feeder inserter for CDs, <> Maps, <> Phone cards, etc, <> Cross turn unit, <> Shingle delivery unit | |||||||
366468 | PETRATTO | Metro | 780x780 mm | USA | 2004 | upon request | show |
Standard equipment | |||||||
358375 | BOBST | Media 68-II (A2) | 680 mm | East Europe | 2003 | upon request | show |
Standard machine | |||||||
360052 | BOBST | Media 68-II (A2) | 680 mm | Europe | 1996 | upon request | show |
electronic upper gluing system HHS, <> 4 channels with 2 guns, <> disc gluing system left, <> Bobst CUBE steering, <> vibrator, pre breaker right and left, <> kicker, <> digital read out units, <> additional upper/ lower middle transport in folding, l <> ock bottom module, <> pneumatic, <> controlled press station. <> Reconditioning 2022: cleaned, checked, repainted, new feeder- and transport belts. <> StraightLine <> Lock-bottom <> Double wall <> Counter | |||||||
372619 | BOBST | Media 68 | 680 mm | Europe | 1984 | upon request | show |
StraightLine <> Auto bottom | |||||||
370352 | BOBST | Media 68 | 680 mm | USA | 1983 | upon request | show |
Equipped for S/L style cartons with 1st & 3rd pre-break <> 2 carriers in pre-fold section, 3 carriers in folding section <> Lower left glue pot with NEW 3mm wheel, scraper & drive belt <> Counter / kicker, <> compression section (weights) <> Cleaned and checked <> Partly overhauled | |||||||
363066 | BOBST | Media 68 | 680 mm | USA | 1990 | upon request | show |
Standard machine | |||||||
372876 | BOBST | Media 100 III–A2 | 1000 mm | Europe | 1999 | upon request | show |
* overhauled in 2022 <> Longitudinal seam, folded bottom, <> Electronic top gluing unit HHS X-tend², <> 8 channel with 5 application heads, <> high pressure glue pump, <> double disc top gluing unit, <> disc bottom gluing unit left, <> vacuum feeder, <> jogger, <> tooth gauge on the feeder, <> electronic overhaul folding, <> CUBE control system, <> motorised transfer station, <> digital position indicator, <> additional centre transport in folding station, <> Pre-breaker right and left, <> kicker, <> pneumatic pressing belt, <> blank alignment station on the press belt, <> minimum folding device, <> including KLF-400 glue flap trimming unit. <> Feeder stop consisting of: <> * X-Pect control unit with system bracket <> * Encoder with holder <> * Touch screen monitor <> * Folding switch with CT 30 read head <> * Complete cable set <> Lower press belt renewed <> 4 + 6 point glue system <> Counter <> Cleaned and checked | |||||||
371937 | BOBST | Media 100 III–A2 | 1000 mm | Europe | 2002 | upon request | show |
pre creaser <> crash lock bottom <> 4 corners <> 4 gluing points - KAS C600 <> KAS with 3 glue guns <> Linear - Left glue circle <> Material weight: 100-600 g/m2 <> Wave E and B up to 8 mm when folded <> Cutting length: 60 - 600 mm <> Cutting width: 126-1000 mm <> Speed: up to 350 m/min | |||||||
366349 | BOBST | Media 100 III–A2 | 1000 mm | Europe | 2002 | upon request | show |
3 guns for the hot glue <> 3 guns for the cold glue <> envelopes disks <> Standard equipment <> StraightLine <> Lock-bottom <> Double wall <> Computer programm | |||||||
369805 | BOBST | Media 100 III–A2 | 1000 mm | Europe | 2004 | upon request | show |
linear gluing <> Auto background <> Device for 4-6 point boxes <> hhs gluing system with 3 guns (controller for 8 guns) <> Left disc gluing system <> Cube. System <> Vibrator in the feeder <> Electronic counter <> Small box device (minimum size 56mm open, 25mm folded) <> Device for covers and envelopes <> Continuous gluing unit <> Upper and lower center conveyors <> Central conveyors <> Speed variators for folding belts <> Compression conveyor <> Left and right infeed conveyor with squaring device | |||||||
371813 | BOBST | Media 100 II-A2 | USA | 2003 | upon request | show | |
4 corner by New Electronic Servo Motors <> New HSS Xact 4 channel Glue System <> Bobst Cube Control With Touch screen and Job Memory <> StraightLine <> Auto bottom <> 4-Point gluing system <> Partly overhauled | |||||||
372148 | BOBST | Media 100 II-A2 | South America | 1999 | upon request | show | |
Side gluing, automatic backing. <> Glues 4 tips. <> By adding an injector system, you can glue 6 tips, much more useful. <> Barcode reader. <> Adaptable for Microcorrugated. <> Glue detection Upper and lower carriage in final folding. Locks the lower part. <> Gluing system: upper wheel. <> Right + left pre-breaker. <> Pneumatically controlled press station. <> Vibrator: feeder. <> CUBE system: memory 5000 types. <> Cleaned and checked | |||||||
364297 | BOBST | Media 100 II-A2 | Europe | 2004 | upon request | show | |
Linear gluing <> Double gluing <> Glued 4 and 6 points with servo positioning <> Solid cardboard 100-600 g/m2 <> Corrugated up to flute "E" maximum thickness 8 mm <> Operating speed 20 - 300 m/min <> Drive system slow forward speed 20 m/min <> Vibrator in feeder <> Pre-bending section <> Double-sided tape applicator "apr" <> Bobst Computer Setup <> Electronic counter <> 2 Nordson hotmelt / pur injector gluing equipment <> Compression conveyor <> Lock-bottom | |||||||
368281 | BOBST | Media 100 II-A2 | Europe | 2004 | upon request | show | |
straight line version for straight-glued boxes, crash-bottom-boxes + 4-point-boxes <> feeder vibration <> pre-brakers <> lower disc-gluing-system left <> fold-section <> crash lock bottom module <> electronic upper gluing system KAS C-800-Compact <> 4 gluing-nozzles <> max. 5 gluing-points <> sections broaching forming 2 pcs. <> pneumatic controlled press-station with exit <> CUBE center control-system with display | |||||||
359521 | BOBST | Media 100 II-A2 | South America | 1999 | upon request | show | |
It has side gluing and automatic background. <> Code bar scanner. Expulsion. <> Glue detection. <> Disc/top wheel gluing system. <> Right/left pre-breaker. <> Pneumatically controlled press station. <> Bucket system. <> Memory up to 5000 types of box templates. <> Vibrator in feeder. <> You can hit 6 tips: Adding a gun injector system (original HHS Baumer) | |||||||
371384 | BOBST | Media 100 | 1040 mm | USA | 1995 | upon request | show |
1 Main Gauge for Feeder. <> Vacuum Belts. <> Central Conveyors TBD. <> No Extrusion or Glue Pot System. <> WSI Edgepack. <> Dart Extension Conveyor. <> The EDGE PACK has only been used three (3) times since new. <> StraightLine | |||||||
372019 | MOLL | Marathon | 762x762 mm | Europe | 1999 | upon request | show |
'Dial-a-Feed' hopper friction feeder with belts <> Infeed table with plough formers & guides <> ‘Tru-Count’ automatic counter with batching <> ‘Quadraplex’ glue control unit with 4 channels for up to 4 gluing heads with electronic cut-off control <> Gluing options of: <> ‘Dynatec’ pre-melt unit with 2 x heated pipes & hot-melt gluing heads or, <> PVA pressurized cold glue unit with 2 x gluing heads <> ‘Marathon’ Pocket Fold unit with; <> Upper & lower buckle plate fold station and segmented rollers <> 'Dial-a-Stack' compression stream delivery conveyor <> Including accessories and manuals. | |||||||
371572 | MOLL | Marathon | 762x762 mm | USA | 2017 | upon request | show |
Friction Feeder <> Marathon Regal w/Dial-a-Feed <> Quadraflex w/compression table <> End-of-Line Collection Table <> Versa Fold & Stacker with Glue System | |||||||
365670 | MOLL | Marathon | 762x762 mm | Europe | 1997 | upon request | show |
Dial-a-Feed' air suction pile feeder with integral pump <> Infeed table with plow formers & guides <> ‘Tru-Count’ Automatic counter with batching <> ‘Quadraplex’ glue control unit with 4 channels for up to 4 gluing heads with electronic cut-off control <> PVA pressurized cold glue unit with 2 x gluing heads <> ‘Marathon’ Pocket Fold unit with; <> - Upper & lower buckle plate fold station and segmented rollers <> ‘Dial-a-Stack’ shingle delivery table <> Also including; <> ‘Bump n Turn’ unit allows the product to be turned & folded in another direction <> ‘Final Fold’ unit creates an in-line final fold in an upward or downward format with rollers & formers <> Including accessories and manuals. | |||||||
361047 | VEGA | Junior 1030 | 1030 mm | Italy | 1989 | upon request | show |
Maximum open box size: mm. 1030 <> Three-phase motor with variable speed, remote control <> 3 glue guns <> Straightline gluing <> Crash lock and straight line <> Lock-bottom | |||||||
371535 | BOBST | HandyPack | Middle East | 2000 | upon request | show | |
HANDYPACK FOR COLLECTING FOLDED AND GLUED BOXES <> Solid board: up to 700 g/m2 <> Corrugated board: B and E | |||||||
372913 | BOBST | HandyPack | Europe | 1996 | upon request | show | |
HANDYPACK FOR COLLECTING FOLDED AND GLUED BOXES <> Solid board: up to 700 g/m2 <> Corrugated board: B and E | |||||||
330885 | LAMINA | Glueline | 4.000 x 1.000 (4m x 1m) | Europe | 2014 | upon request | show |
Mod. Glueline 675 <> Special to make just boxes of linear folding, folding middle boxes or middle rollers <> Introducer automatic <> Exit by accumulator <> It could work with the following materials: <> Micro or corrugated cardboard with the following thicknesses: F; E; B; EE; EF; EB; FB; C y DD <> Equipped with injectors <> You can paste boxes of maximum development: 4.000 x 1.000 (4m x 1m) <> Minimum: 700 x 500 <> You can paste middle boxes or middle rollers: <> Maximum: 2.000 x 1.000 <> Minimum: 700 x 500 | |||||||
368460 | LAMINA | GL 1800 | 1800 mm | Europe | 2017 | upon request | show |
Two gluing heads an one tape station | |||||||
366960 | LAMINA | GL 1400 | 1400 mm | Europe | 2017 | upon request | show |
Glue type: 2 guns with hot melt <> Extras: 2 cold tape guns adhesive | |||||||
372426 | LAMINA | GL 1400 | 1400 mm | Europe | 2002 | upon request | show |
Control console: PLC control with Touch Screen <> Oil– and waterfree air |