No | Brand | Model | Size | Location | Age | Price | Tools |
---|---|---|---|---|---|---|---|
363054 | FOLIANT | Pollux 760 SF | Europe | 2021 | upon request | show | |
Standard equipment | |||||||
370036 | FOLIANT | Mercury 530 SF | Europe | 2019 | upon request | show | |
Mod. MERCURY 530 NG 4X4 <> Vacuum feeder Heidelberg, high pile 54 cm <> JOGGER 530 is an adjustable vibrating reception unit for the laminated sheets stocking. Its capacity is limited to a 10 cm pile of sheets <> FOLIANT FOILER - A winding device that allows the use of metalized film (gold, silver, red, etc.) and spot varnish film. <> New equipment, never used after installation | |||||||
367475 | BAGEL | Digifav B2 | Europe | 2018 | upon request | show | |
Counter: 636’364 sheets only ! <> Pneumatic feeder with two air suction units <> Thermal oil sealed heating roller | |||||||
366040 | LAMINA | FA 1116 | Europe | 2018 | upon request | show | |
18 mio. <> with automatic board feeder, glue unit, <> pressure belt, <> PLC control panel, registration unit, <> pressing rollers, <> down stacker delivery. | |||||||
361797 | LAMINA | FA 1416 | Europe | 2018 | upon request | show | |
Mod.1416 FL fully-automatic laminating machine <> Max sheet size: 1400 x 1600 mm <> Min sheet size: 500 x 500 mm <> Top sheet: 130-350 gsm <> Bottom sheet: thickness 0,6-1 mm <> Feeder height: Top 1600 mm <> Registration accuracy (depending on material): up to 0,2 mm <> Speed (depending on material): Up to 5000 s/h <> Power: 5 kW <> Automatic non-stop feeder <> Automatic stream feeder for top sheet <> Precision gluing unit with automatic glue application <> Laminating station with automatic front and side registration system <> Pressure station <> Stacking table <> PLC control | |||||||
370294 | GZ | 1450L | Europe | 2018 | upon request | show | |
GZ Intelligent High Speed Mounting GZ-1450L <> Paper bonding alignment system <> Computer bus interface operating system <> High sensitivity and fast speed <> Applicable glue: Paper glue, starch cardboard glue, etc... (suitable for bonding glue between PH6-8) <> Applicable paper: Cardboards above 250 g are mounted in pairs, gray boards are mounted, F, E, B, flat double pits, cardboard mounted | |||||||
369915 | KBA FLEXOTECNICA | Mono | Europe | 2017 | upon request | show | |
Solventless laminator with strip lamination capabilities <> 1350mm web width <> 1300mm coating width <> 1000mm diameter, shaftless unwinds (With motor for driven unwinding) <> 500mm strip lamination unwind station <> 3x edge guides for unwinds and rewind <> 1000mm diameter, shaftless rewind <> 400m/min run speed <> Matrix mixer unit for Solventless glue <> Industrial Frigo heating system <> Corona treater <> - <> Suitable for the following materials... <> BOPP - 12-80μm <> PET 10 - 30 μm <> LDPE, LLDPE 20 - 100 μm <> OPA 12 - 18 μm <> ALU 7 - 40 μm <> PA CAST 20 - 80 μm <> CPP 20 - 100 g/m2 <> PAPER - 20-60gsm <> - <> Roll lifting trolley <> Airshafts for 3inch and 6inch <> Shaftless chucks for 3inch and 6inch <> Assorted sleeves for lamination and strip lamination | |||||||
366643 | LAMINA | 1620 BL | Europe | 2017 | upon request | show | |
Mod. Blackline 1620 BL FA Feeder 800/500 <> Glue: PVA type or as specified | |||||||
371040 | MEIGUANG | FMZ 1650 | Europe | 2016 | upon request | show | |
Automatic offset sheet feeder with movable tray and stack lift <> Automatic cardboard sheet feeder (manual loading) <> Vynilic gluer <> Press conveyor with manual delivery (automatic delivery possible) | |||||||
373234 | PAPERPLAST | Dry 70/102 | Europe | 2016 | upon request | show | |
Automatic thermal film laminator <> Automatic sheet feeder <> Vacuum infeed table <> Laminating unit with heated chrome cylinder <> ICS Heating unit <> Sheet separating unit Pile delivery unit | |||||||
371478 | MEIGUANG | FMZ 1650 | Europe | 2016 | upon request | show | |
150 hours of use only <> Gluing on single and double grooves <> Gluing possible on 2mm compact cardboard (blister type) <> Automatic offset sheet feeder <> Automatic cardboard plate feeder <> Suitable for offset packaging activity (Bag in box / Cases / Boxes / Miscellaneous Boxing) | |||||||
371354 | FOLIANT | Vega 400 A | Europe | 2016 | upon request | show | |
* automatic loading with suction tape <> * teflon roller with a non-stick surface <> * automatic separation <> * jogger vibrating unloader | |||||||
371594 | FOLIANT | Pollux 760 SF | Europe | 2015 | upon request | show | |
* pallet loader <> * suction loading head <> * vibratory unloader - jogger | |||||||
370020 | FOLIANT | Gulliver C 520S | Europe | 2015 | upon request | show | |
manual loading <> automatic separation <> pneumatic cylinder pressure | |||||||
371139 | KOMFI | Amiga 52 | Europe | 2015 | upon request | show | |
Features and Benefits: <> Automatic control of the entire lamination process, <> Touch screen display provides comfortable control of the machine <> Electronic control of sheet transition amount <> Laminating cylinder heated by an infrared emitter <> Processor-controlled feeder head and additional separation airflow ensure stable sheet loading; <> Precise and stable overlap at any laminating speed | |||||||
363397 | KOMFI | Sagitta | Europe | 2015 | upon request | show | |
Automatic Feeder // Speed up to 35m/min <> OPP, PET, Nylon // Long sheet separation blowers // Miss-Sheet detection <> Sheet decurling unit // automatic sheet separation // <> Delivery table with Jogger | |||||||
371410 | TECNOMAC | Digit 76 | Europe | 2014 | upon request | show | |
Oil Heated Cylinder <> Automatic Feeder <> Pneumatic Pressure Roller <> Pile Delivery | |||||||
369110 | D+K | Europa | Europe | 2013 | upon request | show | |
Standard equipment | |||||||
371867 | TECNOMAC | Evolution 76 | Europe | 2013 | upon request | show | |
. Automatic Feeder <> . Electronic Overlap <> . Chromed roll heated by fluid <> . Pressure rubber roller with pneumatic movement <> . Automatic coil elevator <> . Motorized trimming device <> . Decurling device <> . Automatic separator <> . Option included, Double side laminating unit <> . Automatic Stacker | |||||||
338573 | FOLIANT | Gemini C 400 | Europe | 2012 | upon request | show | |
Pneumatic Roller Pressure <> Extended Feeder and Delivery <> Jogger 400 | |||||||
363331 | FOLIANT | 520 | Europe | 2012 | upon request | show | |
Mod. FOLIANT 520T <> Automatic cutting and separation and Board delivery <> Hand feeding station | |||||||
371257 | PAPERPLAST | Baby Dry 52 | Europe | 2012 | upon request | show | |
Pallet feeder <> Autocut <> Pallet delivery | |||||||
361455 | KOMFI | Delta 52 | Europe | 2012 | upon request | show | |
Standard machine | |||||||
373014 | KOMFI | Sagitta | Europe | 2012 | upon request | show | |
Automatic feeding head <> Automatic sheet separation <> Automatic Stacker B1 <> Technical documentations <> Compressor BECKER T3 | |||||||
368112 | LAMINA | 1620 BL | Europe | 2011 | upon request | show | |
FA Feeder 800/500, | |||||||
358797 | FOLIANT | Taurus 530 SF | Italy | 2011 | upon request | show | |
Flat feeder <> Computer <> complete and in working condition <> Full description on request | |||||||
366802 | KOMFI | Sagitta | Europe | 2011 | upon request | show | |
only 1303 working hours ( 1,7 mio sheets)! <> Automatic feeder - feeding from pallet <> Komfi-design feeding head <> Vacuum pump <> Automatic sheet overlap control <> Miss-feeding detection <> Laminating cylinder heated by 5-zone electrical resistance heater <> Temperature drop detection <> Polyurethane coated pressure roll <> Air pressure decrease detector <> Airshaft for film unwinding <> Adjustable sheet de-curling unit <> Automatic sheet separation using rotating knives and built-in perforator <> Snapping unit pneumatically controlled <> Automatic stacker | |||||||
367240 | D+K | Europa | Europe | 2010 | upon request | show | |
Deep Pile Feeder with Suction Head <> Missing Sheet Detector <> Centralised Control Panel <> Film Unwind <> Decurl Bar <> Automatic Sheet Separator <> Chute Delivery | |||||||
372317 | PAPERPLAST | Dry 70 | Europe | 2010 | upon request | show | |
Sheet pile feeder <> Laminating machine with heated chromed cylinder <> Sheet pile delivery <> Thermoregulator EURO CHILLER Flow <> Cooler TAE-EVO <> Integrated control panel | |||||||
370211 | GBC | Voyager | South America | 2010 | upon request | show | |
Automatic sheet feeder > <> Pneumatic film reel shaft > <> Paper overlap control > <> Paper curvature removal bar > <> Hot laminating unit > <> Automatic sheet separator with cutting knife. | |||||||
371886 | TECNOMAC | Synergy Digit 70 | Europe | 2010 | upon request | show | |
Oil Heated Cylinder <> Automatic Feeder <> Pneumatic Pressure Roller <> Pile Delivery | |||||||
366903 | KOMFI | Amiga 52 | Europe | 2010 | upon request | show | |
Paper weight 115-600 g/m² <> Paper thickness: <> Max 0.7 mm (with overlap >0 <> Max 1.4 mm (with overlap <0) <> Thickness of laminating film 24-50 µm <> Standard machine | |||||||
369280 | FOLIANT | Gulliver C 520S | Europe | 2010 | upon request | show | |
*automatic separation <> * manual loading <> * pneumatic pressure <> * Teflon cylinder <> * jogger - vibrating unloader | |||||||
362634 | FOLIANT | Orpheus C 760A | Europe | 2009 | upon request | show | |
automatice laminating machine <> size: B1 <> automatic loading <> automatic separation <> compresor | |||||||
370387 | ECOTACK | TLMG/50 | Europe | 2009 | upon request | show | |
Complete with vacuum register station <> Calander diameter 450 mm oil-heated with central <> Spare rubberized roller <> Coil elevator <> Automatic separator <> Cooling roller with refrigerator <> Corrugator for light paper <> Automatic stacker | |||||||
371222 | LAMINA | 1110 BL | Europe | 2009 | upon request | show | |
Mod. Blackline Auto 1110 | |||||||
371920 | BILLHOEFER | EK-HL-3 | Europe | 2008 | upon request | show | |
Automatic Sheet Feeder A-3: Mabeg Suction Head, Double Sheet Control <> Laminating Unit EK-HL-3: Waterbased & Thermal <> Automatic Sheet Seperator MFT-H-3 <> Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife <> Automatic Stacker S-3 <> Non Stop Feeder & Delivery <> High Pile Delivery <> Airjet-Dryer | |||||||
372376 | AUTOBOND | Mini T52 | Europe | 2008 | upon request | show | |
Mod. Mini T52 TPM <> Suction Feeder, <> Auto Separator/De-sheeter, <> Jogger Table Delivery | |||||||
372413 | KOMFI | Amiga 52 | Europe | 2008 | upon request | show | |
363346 | TAULER | Smart 52 | Europe | 2008 | upon request | show | |
Manual feeder <> Pneumatic pressure | |||||||
329255 | KOMFI | Sagitta | Europe | 2008 | upon request | show | |
KNIFE <> CREASING | |||||||
370259 | TAULER | Printlam CTI 105 | Europe | 2008 | upon request | show | |
Mod. Printlam Plus 105 <> Standard equipment | |||||||
370729 | D+K | Polestar | Europe | 2007 | upon request | show | |
PLC controlled - <> Stacker - <> Seperator | |||||||
355784 | TÜNKERS | Proliner 1150 VKM | Europe | 2007 | upon request | show | |
Standard machine <> Dismantled | |||||||
362427 | GMP | SurelamPlus-800DS | Europe | 2007 | upon request | show | |
Standard machine | |||||||
371918 | BILLHOEFER | EK-HL-4 | Europe | 2007 | upon request | show | |
Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control <> Laminating Unit EK-HL-4: Waterbased & Thermal <> Automatic Sheet Seperator UTM-4 <> Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife <> Powder Spray Removal Device GK-4 <> Automatic Stacker S-3 | |||||||
351235 | MULTILAM | 7000 | Europe | 2007 | upon request | show | |
* Fully reconditioned on 2021 <> Fully automatic sheet to sheet laminator <> Max. thickness: double corrugated 6mm <> Min. thickness 380 gr | |||||||
371595 | FOLIANT | Gemini 400 S | Europe | 2007 | upon request | show | |
Manual loading <> Automatic separation | |||||||
371917 | BILLHOEFER | EK-104/50 | Europe | 2006 | upon request | show | |
Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, <> Double Sheet Control <> Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal <> Automatic Sheet Seperator TM-104 (TM-3) <> Seperating Unit: Quadruple Round Knife, Perforating Device <> Powder Spray Removal Device <> Automatic Stacker S-3 | |||||||
369613 | PAPERPLAST | Dry 40 | Europe | 2006 | upon request | show | |
Pallet feeder <> Pallet delivery <> max speed 40m/min. <> Tool Temp cool unit |