Offer 351237
BOBST Novacut 106-E
| Brand | Model |
|---|---|
| BOBST | Novacut 106-E |
| BOBST Novacut 106-E technical details | |
| Sheet Size Max | 740x1060 mm (29.125x41.75 in) |
| Sheet Size Min | 350x400 mm (13.75x15.75 in) |
| Embossing Size Max | 710x1060 mm |
| Stamping Size Max | 725x1060 mm |
| Gripper Margin | 9 to 17 mm |
| Height Of Cutting Rules | 23.8 mm |
| Platen Pressure Max | 2.6 MN (286 US tons) |
| Production Speed | 8000 sheets/h. |
| Pile Height (Normal Feeder) | 1400 mm (800 mm) |
| Pile Height (Non Stop) | |
| Total Power Consumption | |
| Space required | |
| Weight Approx | |
| Hs Code | 84439959 HS Codes Classification of Other |
| Transport By Truck | |
| Transport By Sea | |
| Offer details | |
| Age | 2019 December / first installed 2020 |
| Condition | Like new |
| Location | Europe |
| Under power | Yes |
| Still in production | No |
| Test possible | Yes |
| Complete and in working condition | Yes |
| Available | S O L D |
| Offer last updated | Thu, 10 Jun 2021 14:33:48 +0200 |
| Working hours/ impression total | 260 h |
| Description/ Machine configuration | |
| New model <> SPHERE the new BOBST Human Machine <> Interface (HMI) <> With color touch screen 22" for machine's operation and optimal ergonomics <> System managed by a microprocessor developed by Bobst, permits to easily operate the machine, visualize and control multiple functions and elements on machine <> Machine equipped with Helpline Plus system.- Centerline system for quick job changeover <> Electronic device for sheet travel control <> Adjustable centering at stripping station <> Main motor with frequency converter control <> FEEDER with pile tray with handle allowing manual lateral correction of the pile during production <> Pile lifting controlled by Pressfoot <> Rear pile guides (OS and OOS) <> Side blowers adjustable <> Suction unit with multiple adjustments <> Safety system for lowering the pile tray <> FEED TABLE covered with an anti-static stainless steel plate <> Feed table inlet equipped with lateral ramps. 4 Individually adjustable front lays with front register control <> "Pull" guide (OS) adjustable according to Centerline marks, with side register control. Convertible as push-guide, with electro-optic control system <> Double sheet detector <> Mechanical, integrated on pull guide (OS) <> Support plates at entry of platen station. - Feed belt slow-down device guiding the sheets to the front lays (increase registration with light materials) <> Upper frame with pneumatic lifting device. - Upper transport equipment for paper, paperboard and corrugated board <> Transport belts <> With lateral guidance and automatic tension system <> PLATEN <> Gripper reopening device <> Automatic equipment centering and locking for chase and supporting plate <> Automatic locking of the chase against the upper beam <> Measurement of cutting force with strain gauge <> 1 Synthetic supporting plate. Thickness 23.5 mm <> WASTE STRIPPING STATION with quick locking device of the central stripping board <> Motorized lifting of the upper frame <> Integrated Quick Locking system <> Automatic and quick locking device for the upper and central tool, integrated in the machine <> Adjustable centerings on all equipment (upper, central and lower) <> DELIVERY Pile tray <> Front jogger <> Adjustable rear and side joggers with Centerline marks <> Braking Brush <> Pneumatically operated, pressure and operating angle are adjusted on the HMI. The function of the brush is automatic, it adjust according to the speed of the machine. <> The brush and the tablet are motorized and fit together or separately depending on the length of the sheet. Dial position indicators facilitate this operation. <> Manual non-stop rack <> TOOLING: <> 1 Upper chase with quick locking : fixed bottom plate (T-103.001) <> Plate, thickness 2 mm and make-ready protection plate made of synthetic material, thickness 1mm. <> 1 Fastening equipment for stripping die (T-205.002) <> Including crossbars and clamps <> 1 Adaptation material for stripping board on the central frame (quick locking) (T-225.002), allows wooden stripping form fastening on the frame with quick locking device (T-210.001). <> 1 Lower stripping pull-out frame (T-230.001) <> 1 Lower stripping equipment (T-235.001) <> Waste stripping including crossbars, pins and supports. <> CONFORMITY TO STANDARDS AND SECURITY | |
Price: upon request
Pictures
Pictures available upon request.
Videos
Videos available upon request.
Files
Similar offers
| No | Brand | Model | Location | Age | Price | Tools |
|---|---|---|---|---|---|---|
| No | Machine info | |||||
| 352976 | BOBST | Novacut 106-E | Europe | 2019 | upon request | show |
| 352976 show | Brand:BOBST Model:Novacut 106-E Year:2019 Price:upon requestEurope | |||||
| 354131 | BOBST | Novacut 106-E | Europe | 2015 | upon request | show |
| 354131 show | Brand:BOBST Model:Novacut 106-E Year:2015 Price:upon requestEurope | |||||
| 353579 | BOBST | Novacut 106-E | USA | 2017 | upon request | show |
| 353579 show | Brand:BOBST Model:Novacut 106-E Year:2017 Price:upon requestUSA |