Non | Marque | Modèle | Taille | Emplacement | Âge | Prix | Outils |
---|---|---|---|---|---|---|---|
373290 | MK | MK 1060 E | Europe | 2015 | upon request | montrer | |
Mod. MK1060 v400 <> without stripping <> Fast adjusting to high speed feeder <> 4 lifting suction cups and 5 carrier suction cups <> Wide conveyor belt <> Imported torque restrainer <> Imported worm wheel and worm <> Pneumatic locking chase device <> Bi-directional pneumatic locking chase device <> 3+1.2 adjustable lower supporting plate <> Imported pneumatic clutch <> 8 temperature zone heating system <> Central registration system <> Patent precision adjustable gripper bar <> Automatic intermittent lubrication system <> Pressure over-load protection <> Mitsubishi PLC Q series <> Standard Honeycomb plate <> Standard die cutting chase <> External pre-stacking device <> Imported high performance intermittent splitter <> Non-stop in feeder + delivery | |||||||
373282 | STEUER | PZ 104 | Europe | 1988 | upon request | montrer | |
Cylinder with hot foil stamping <> 4 motors <> 4 advances <> 1 honeycomb | |||||||
373281 | STEUER | PZ 90 | Europe | 1995 | upon request | montrer | |
HOT FOIL STAMPING MACHINE HEIDELBERG STEUER PZ 90 <> 4 motors <> 4 advances <> (3 are working) <> 1 honeycomb <> 4 Heating zones <> based on letterpress Heidelberg SBD | |||||||
373235 | SBL | 1050 SEF | Europe | 2008 | upon request | montrer | |
Automatic Hot Foil and Embossing Machine | |||||||
372915 | STEUER | PZ 82 (SBB) | Europe | 2000 | upon request | montrer | |
4 Foil pulls <> SPM STEUER PANEL with individually program <> 2 Honeycomb chases <> Height-adjustable formbed <> Pre-pile device for feeder <> based on Heidelberg letterpress SBB | |||||||
372579 | BOBST | SP 76 BM | 760x560 mm | USA | 1998 | upon request | montrer |
Foil stamping machine <> Hot stamp foiler | |||||||
372497 | BOBST | SP 76 BM | 760x560 mm | Europe | 2004 | upon request | montrer |
HOT FOIL <> DIE CUTTING | |||||||
372322 | SBL | 1050 SEF | USA | 2000 | upon request | montrer | |
Stripping station | |||||||
371870 | MK | Easymatrix 106 CS | Europe | 2020 | upon request | montrer | |
Standard equipment | |||||||
371747 | YAWA | TYM 780 | 540x780 mm | Korea (Republic of) | 2012 | upon request | montrer |
Standard equipment | |||||||
371615 | STEUER | PZ 104 H | Europe | 1988 | upon request | montrer | |
3 Electronic Foil Pulls, <> 4 Heated Zones, <> Honeycomb Base Chase, <> High Pile Feeder, <> Overhauled <> Cleaned and checked | |||||||
371386 | STEUER | PZ 104 | Europe | 1987 | upon request | montrer | |
4 foil pulls / 4 honeycombs | |||||||
371321 | MK | Easymatrix 106 CS | USA | 2017 | upon request | montrer | |
STANDARD EQUIPMENT OF THE MACHINE: <> Feeder with Non-Stop system equipped with: <> − Head for paper, cardboard and corrugated cardboard <> − Head with quick positioning and fine adjustment <> − Electro-mechanical double sheet detector <> − Side blowers <> − Suction nozzles adjustable in height and inclination <> − Battery platform with motorized lateral adjustment of +/- 20mm, <> including ramp <> − Becker air and vacuum pump <> − 1 non-stop pallet <> − Table of feeding with 8 tapes for formats of normal paper and 2 tapes <> for small formats <> − Side guides on operator side and drive side <> − Lateral guides for push or pull operation, changeable without tools <> − Four active front guides with fiber optics <> − Angled adjustable front guides <> − Manual wheel for adjusting rollers and brushes on the feeding table <> at the same time <> − Registration system <> − "Centerline" system <> − Motorized adjustment of the punching <> pressure <> − Oil cooling system <> − Pneumatic lifting of die cutting chase <> − Fine adjustment system: +/- 0.9mm <> − Registration system <> − 1 die cutting branch <> − 1 4 mm die-cut plate <> − 1 punching plate of 1.2mm <> "Centerline" system <> − Top desking unit with manual lifting device <> − Frame of the desking table with "quick-lock" device <> − Sheet monitoring sensor (sheet drop sensor) <> − Lighting of the destocking station <> − 2 upper tool frames <> − 2 lower tool frames <> Equipamiento 1 equipment for upper and lower <> desking tools (without frame) <> Recipiente 1 refill container <> − Non-stop exit gate <> − Side and front compactors <> − Pneumatic device for sheet extraction <> − Sheet brake by brush system 1 x pallet for delivery <> triple pile <> CONTROL PANEL <> DELIVERY <> − Mitsubishi PLC <> − Main motor with pneumatic clutch <> − Automatic chain lubrication <> − Platform of command <> − Touch screen 10.4 '', with indications of the <> operating status <> − Local control panels for convenient handling <> − Central lubrication system <> − Overload protection with pneumatic clutch | |||||||
370972 | SAROGLIA | FUB 74 | Europe | 2000 | upon request | montrer | |
Automatic feeder & delivery <> Blind embossing <> Die-cutting, Creasing, Kiss cutting <> Hot-foil system with 2 pulls <> Tools, Documentations <> Complete with all standard parts and accessories | |||||||
370910 | STEUER | PZ 104 | Europe | 1996 | upon request | montrer | |
SPIESS feeder with prefeed <> Front and side detection cells PC. <> CONTROL PC (2 years) <> 3 feeds <> 610m coils possible <> 2 straightened honeycombs <> 2 new honeycomb frames <> 2 new heating elements <> Air-conditioned electronic cabinet | |||||||
370021 | BOBST | SP 106 FCH | Europe | 2015 | upon request | montrer | |
Total Running Hour :18,333 Hours <> Total Hot Stamping : 17,241,129 Sheets <> Total Die Cutter : 6,453156 Sheets | |||||||
369872 | SBL | 1050 SEF | USA | 1994 | upon request | montrer | |
Platen foil stamper & diecutter, <> has two foil pulls, <> 6 rewinds, <> heat and stripping | |||||||
369471 | MK | MK 1060 MF | Europe | 2015 | upon request | montrer | |
counter: 30 mio. <> Stripping station | |||||||
368687 | MK | MK 920 SS | Europe | 2012 | upon request | montrer | |
1st Impression Station for Stamping/Embossing Consisting of: <> Micro Adjustment, Lower Platen with 3mm & 1mm Cutting Plates, Quick-Lock of Chase, 3 Shafts, Computer Controller, 20 Heated Zones, Foil Break Detectors, Driving System for Synchro Motion with 2nd Impression Station <> 2nd Impression Station for Stamping/Embossing Consisting of: <> Micro Adjustment, Sheet Break Detector, Lower Platen with 3mm & 1mm Cutting Plates, Quick-Lock of Chase, 3 Shafts, Computer Controller, 2 Foil Pay Off Shafts, 20 Heated Zones, Foil Break Detectors <> 2 x Honey-Comb Chases <> Colour Display Screen Computer on both Units <> Foil Pulls: <> 3 in Machine Direction (1st Station) <> 3 in Machine Direction (2nd Station) <> 2 in Transversal Direction (2nd Station) <> Non-stop in feeder + delivery | |||||||
368198 | STEUER | PZ 104 | Europe | 2006 | upon request | montrer | |
Output per hour max. up to 3,000 sheets/h <> Sheet format max. 730 x 1,040 mm <> Sheet format min. 360 x 520 mm <> Sheet thickness 0.5 mm <> Embossing format max. 702 x 1,005 mm <> Gripper edge 8 – 10 mm <> Cylinder diameter 420 mm <> Lift height 1.5 mm <> Height of system stack 600 mm <> Height of display stack 600 mm <> Width of the embossing foil roll, max. 950 mm <> Min. distance between the film rolls 2 mm <> Outer diameter of the embossing foil rolls, max. 130 mm <> Embossing tool height 7 mm <> Electrical connections: <> Length of the machine 4,800 mm <> Width of the machine (without pre-stacking device) 3,175 mm <> Total height 2,350 mm <> 2. Equipment <> Embossing principle: round-flat <> 3 foil advantages <> 3 foil wraps <> 4 heating zones <> 2 honeycomb foundations <> • Height-adjustable embossed foundation <> • Optical front and pull mark monitoring <> • Low pile feeder (N) | |||||||
367958 | STRATI | N 2 / 41 | Europe | 2007 | upon request | montrer | |
Standard equipment | |||||||
367505 | YAWA | TYM 790 | 790x560 mm | Europe | 2015 | upon request | montrer |
with hot stamping | |||||||
366483 | MK | MK 1060 E | Europe | 2014 | upon request | montrer | |
Non-stop high-speed sheet feeding unit - top speed more than 125 sheets /minute, <> Sheet slow-down, <> Adjustable suction duct, <> 3 feeder anti-collision devices, <> Motorized lateral feeding pile adjustment, <> Automatic feeding pile adjustment, <> Motorized lateral side blower and side jogger, <> Push-pull side lay, <> Vacuum belt table, <> Pneumatic lifting device for sheet feeding frame, <> Double sheet detector, <> High quality sheet conveying belt, Sheet photoelectric detection at side and front lay, <> Gripper opening device for misaligning sheet, single-point electromagnetic positioning clutch, <> Non-stop feeding operation, <> Powerful paper suction feeding head, 4-lifing and 4-forwarding, with the paper suction, <> angles adjustable in accordance with the paper deformation, Paper break brush wheel (4 sets each for soft and hard), <> Paper pressing wheel combinations (8 sets), Non-stop pallet (2 PCS), Non-stop swords (1 set), External pre-piling device MK920MT-A12 <> Die-cutting unit - Combined adjustable lower plate with 3+1.2mm steel plate, 1.2mm die-cutting lower base (1 piece), <> Timing sequence for PLC and electronic cam control, Chase turnover device, Lubricating oil cooling and lubricating system in the main transmission box, Constant speed die-cutting sheet feeding system, Torque limiting overload protector. <> Adjustable die-cutting lower plate with pneumatic locking system, <> Quick-lock die-cutting chase components (1 set) <> Stripping unit - Upper stripping, alloy gripper bar and patented positioning structure (7 sets), <> Strengthened main drive chains. High quality indexing splitter, <> High quality synchronous belt and pulley drive, <> Main drive pneumatic clutch brake device, <> Die-cutting chase with bi-directional pneumatic locking system. <> Tool adapter system with pneumatic lift. Tool adapter system with pneumatic locking and quick lock function, Cassette frame with quick-lock function for middle stripping board, Transmission mechanism of lower stripping frame, <> Gripper bar positioning device at stripping, Centerline system, <> Frames in stripping station with fine adjustment and digital display, 2 x upper tool frames, 2 x lower tool frames. <> Delivery unit - Bidirectional mechanical joggers, Mechanical sheet brake brush with motorized brake force adjustment, blown-air prevention device of paper splicing, Non-Stop rolling apron pneumatic drive, Pneumatic flap for test sheet removal, <> Delivery pallets (2 pieces), Chains transmission <> Complete with full set of tools | |||||||
366284 | MK | MK 1060 ERS | Canada | 2016 | upon request | montrer | |
Mod. MK1060ERsl <> 12” (300 mm) Elevated machine <> Double sheet detector <> O.S. (operator side) pull guide <> Electrical double sheet detector <> Two (2) cutting chases (quick-lock style) <> One (1) 4mm cutting plate <> One (1) compensating plate <> Lower supporting plate with micrometre adjustment <> Centerline system <> Two (2) upper stripping frames with quick locking with tooling <> Two (2) lower stripping frames with tooling <> Upper blanking frame with pneumatic quick lock device <> Lower blanking support frame <> One (1) full sheet delivery device <> Touch screen machine interface electronic display 10.4 x 5.7 inches <> Chase changer above the platine section <> Operator platform <> Non-stop feeder <> Double action stripper | |||||||
363672 | BOBST | SP 76 BM | 760x560 mm | Asia | 1999 | upon request | montrer |
1 x Honeycomb Plate <> 1 x Compensating Plate <> 1 x Stamping Plate | |||||||
361409 | BOBST | SP 76 BM | 760x560 mm | Europe | 2005 | upon request | montrer |
Format max: 760mm x 560mm <> Format min: 300mm x 260 mm <> Gripper margin: 9-17mm <> Stamping/Embosing size: <> - max 750mm x 541mm <> - min 300mm x 260 mm <> Working material: 80-600gr (paper/cardboard) <> Speed max 7000 <> Adjustable temperature: 50°С-160°С <> BM System: <> - Reel diameter max 250mm <> - Hub diameters 25mm or 76mm <> - Foil width 25mm - 760mm <> - Number of foil advance shafts: 3 <> Height of embossing plates: 6.37mm/7mm <> Embossing force adjustable up to 1.6MN <> Pile height at feeder: <> - in normal mode: 980mm <> - in non-stope mode: 780mm <> Pile height at delivery: <> - in normal mode: 850mm <> - in non-stope mode: 780mm <> Adjustable centerline: <> - lateral correction: +/-0.9mm; <> - longiudal correction: +/-0.9mm; <> Honecomb plate for hot-foli and hologram stamping - 1 set; <> Without die-cutting equipment; <> Books and manuals <> Flange system with 3 axles + 6 sets foil rolls <> (Every axles works with up to 6 foil rolls) <> Brake system <> Flange system with 3 axles + 6 sets foil rolls <> (Every axles works with up to 6 foil rolls) <> Brake system | |||||||
359885 | MK | MK 1060 MF | Europe | 2009 | upon request | montrer | |
Mod. MK 1060 M <> Pneumatic side lays in operator side and drive side <> Pneumatic feed table <> Electronic pressure settings <> Electronic pile alignment <> C. 40.804 hours | |||||||
351266 | SBL | 1050 SEF | Russia | 2003 | upon request | montrer | |
Standard machine | |||||||
347576 | SAROGLIA | FUB 72 | Europe | 1986 | upon request | montrer | |
Mod. Saroglia FUB 72 die cutter with Thomson Hotfoiling <> 6 zone heated bed <> 2 foil pulls <> Honeycomb heater plate <> 110 Tons of pressure <> 2,700 impressions per hour <> Over tonnage protection system <> Ability for foil stamping, embossing and die cutting <> Saroglia automatic feeder <> Professionally serviced and maintained <> In stock <> Dismantled <> Cleaned | |||||||
339759 | ALDO BERRA | 2 E | 250 mm | Italy | 1995 | upon request | montrer |
Standard machine | |||||||
337171 | SAROGLIA | FUB 72 | Europe | 1981 | upon request | montrer | |
Can be used also in manual mode <> Can be tested in production <> Standard machine |