Offre 285984
ATENA RDC 10
Marque | Modèle |
---|---|
ATENA | RDC 10 |
ATENA RDC 10 détails techniques | |
Max Web Width | 660 mm |
Max Width Label Cutter | |
Printing Length | |
Printing Width | 640 mm |
Min Web Width | |
Substrates | |
Cutting Accuracy | |
Production Speed | up to 200 m/min |
Max Cylinder Circumference | |
Min Cylinder Circumference | |
Diam Rewind | |
Diam Unwind | |
Core | |
Power consumption | 400 V, 3 phases, 50 Hz |
Space required | |
Weight Approx | |
Hs Code | |
Transport By Truck | |
Transport By Sea | |
Substrate Weight (Paper/Cardboard) | 60-300 gsm |
Max Rotary Die Cutting Width | 660 mm |
Max Rotary Die Cutting Repeat | 800 mm |
Min Rotary Die Cutting Repeat | 535 mm |
Air Volume | 7000 m3/h |
Air Capacity | 40 m/s |
Register Accuracy Print To Print | +/- 0,10 mm |
Print To Cut | +/- 0,15 mm |
Détails de l'offre | |
Âge | 2007 |
Condition | Good |
Condition des bouteilles | Damage free |
Emplacement | Europe |
Under power | Oui |
Toujours en production | Oui |
Test possible | Oui |
Complet et en état de marche | Oui |
Disponible | Immediately |
Offre dernière mise à jour | 19 octobre 2023 10h 37min 58s |
Colors | 7 printing units |
Description / Configuration de la machine | |
Machine designed for: Production of cigarettes packaging, Paper labels and Cardboard packaging <> Counter 12.136.991 impressions <> 3x stage rotary die cutting unit RDC10 <> Drying: thermo-oil installation <> DGC 650 from Eltromat Register control <> 67x printing cylinders (13 steel base only and 54 copper covered) <> 3x sets of cutting + creasing tools (buyer can’t use the whole tool, only original ATN cassettes in which the tools are packed) <> The splicing device is mounted on a robust fixed frame. Two independent sliding rules allow the easy-on-both-side pasting preparation <> 1. Quick stop of the finishing reel <> 2. Locking the web entering the festoon <> 3. Locking on the finishing and the new webs by suction boxes <> 4. Oblique cut by symmetrical guillotine knives <> 5. Evacuation of the tips <> 6. Simultaneous application of the two tapes by means of oscillating arms <> 7. Unlocking of the web by releasing the nip rollers and the suction <> 8. Acceleration of the reel to fill up the festoon <> 9. Tension control at the production speed thanks to a loaded air piston and the 4Q DC drive <> This unit eliminates dust or foreign particles on the web <> 1 Vacuum head made of aluminium <> 2x Electrodes for ionisation ensuring elimination of static charges <> 1 Set of static brushes <> 1 Dust recuperation bag positioned on the machine drive side <> The positive infeed unit with constant tension <> 2 electrostatic assistance units from Eltex for a better inking are included <> Doctor blade <> The doctor blade is arranged with three knuckles <> A chill roll <> Longitudinal sidelay register control <> Type DGC 650 from Eltromat <> 1 Rotary decurler <> 1 Spreading unit <> 1 Electrical equipment <> 1 Universal sheeting tool <> 1 Slitting unit with 2 scissor knives (for the 2 trims) placed on the pull-through unit <> 1 Trim exhauster with pipes and suction pump placed closed to the machine <> The cutting cassette is installed like a cutting tool on the RDC third stage <> 1 High pile receptacle <> 1 Single shaft rewinder RHS <> 1 Automatic edge guide <> 1 Single pneumatic expanding shaft for cores inner diameter 76 mm <> 1 Motor <> Lift of the reel from the floor <> Web cleaner <> WEB guide system <> Turn bar |