CX package for printing material over 350g/cm2 up to 1.2 mm including:<>infeed prepared for cardboard<>special guides at the infeed for printing cardboard<>tubes with blown air in the printing units for printing cardboard up to 600 g/m2<>descending non-stop delivery<>varnishing tower with Harris & Bruno closed chamber system<>ALV2 - 2.6m extended deliver<>refrigeration for the main cabinet<>machine raised by 420 mm<>intercom between infeed and delivery<>ACR - Control - video register control<>electro-mechanical double-sheet control at the output <>Dust extractor at infeed<>Motorised front heel adjustment<>Double sheet control with capacitive and optical sensor<>Automatic washing system for blankets, impression cylinder and ink rollers<>Unwinder for washing cloth<>5x additional shaft sets for washing cloth<>Hickey picker on all 5 units<>Machine preparation for cooling of inking rollers<>Cooling of inking rollers with TECHNOTRANS unit, including<>pH value indicator<>Conductivity indicator<>Operation from desk<>Aquados mixer<>Additional anilox roller for 60/80/90 or 100 lines<>hoist for changing the anilox roller in the varnish tower<>submersible plate at the delivery<>Weko AP 262 sprayer connected to the colortronic console<>plate perforator for coating plates<>IR/hot air dryer at the extended delivery<>VARIDAMP alcohol dampening<>Colortronic (Register, Dampening and Ink Remote System Control)<>Ergotronic<>PWHA Semi automatic plate change