KOLBUS KM 412 from 2011

Mod. KM 412.B<>with Book block feeder<>Meccanotecnica XMT<>- Infeed conveyor from the right<>- ATC thickness control<>- Optical sheet control: SignalLynx<>Card gluer<>Kolbus KK 841<>- Hotmelt glue unit: Nordson Problue<>- Air center: VariAir central system<>- Reject gate for incomplete products: AS 841<>- Set up element<>- Intermediate element with vibrating<>- Transfer into the binder<>- 1st spine preparation station<>- 2nd spine preparation station<>- 3rd spine preparation station<>- Brushing station<>- Excluding dust extraction system, machine was connected to a centralised dust extraction system<>- Base for 1st spine glue system<>- Cold glue spine gluing, interchangeable<>- Intermediate drying station (infrared)<>- Base for 2nd spine glue system<>- Hotmelt spine glue unit, interchangeable<>- Premelter for spine glue unit: LH 375.C<>- PUR spine gluing unit, interchangeable<>- PUR premelter for PUR spine glue unit: Nordson XNO 962<>- Base for side glue system<>- Hotmelt side glue unit, interchangeable<>- Premelter for side glue unit: LH 375.A<>- Heating elements in curve: IR<>- Scoring station: 6<>- 1st nipping and pressing station<>- 2nd nipping and pressing station<>- Lay down device (to the left)<>Transport system<>Kolbus TSE<>Description:<>- Transport system, length (approx)<>- Escape delivery<>Conveyor tower<>Three knife trimmer <>Kolbus HD 153.P<>Product counter: 148 mio<>Description:<>- Co-Pilot with touchscreen<>- Right hand infeed<>- Counter stacker<>- Knife pre-setting device<>- Sets of knives: 2<>- Exchangeable cutting tables (standard set): 7-18<>- Silicone spray device<>Book stacker<>Kolbus (RIMA) XRS 130<>Description:<>- Compensating stacker<>- Delivery to the left and right<>Hand feeding station<>Milling station<>Gauzing station