Offer 376747, a ROLAND R 705 P (2000) from 2007

Mod. R 705 3B P 2/3 HiPrint<>General construction<>• Multi-color sheetfed offset printing press consisting of individual units.<>• Sheet transfer is facilitated through double-diameter printing cylinders.<>• "Seven o'clock geometry" of the printing unit cylinders ensures sheet transfer<>occurs only after printing is complete in the given unit.<>• Digital machine control.<>• General machine control from the console (Press Pilot).<>Feeder<>• Roland cascade feeder.<>• Monitoring and automatic correction of paper pile side alignment; automatic feeder<>adjustment according to sheet size.<>• Automatic height adjustment of the feeder.<>• Double-sheet control with dual systems: electromechanical and ultrasonic.<>• Diagonal sheet adjustment through vacuum belt speed.<>Register mechanism<>• Manual adjustment of each sheet's front edge parallelly and diagonally from side B<>during machine operation.<>• Automatic adjustment of front marks' height.<>• Pneumatic side marks and acoustic side edge monitoring.<>• Automatic side edge adjustment based on sheet size.<>• Electronic sheet feeding monitoring displayed on the screen.<>• Sheet is transferred to the first printing cylinder via pre-gripper and transfer drum.<>• Cardboard guides into the marks.<>Printing units<>• Double-diameter impression cylinder.<>• Specially coated impression, form, and blanket cylinders.<>• Blow-off device on the impression cylinder.<>• Adjustable blowers for the sheet air track.<>• Sensors for missing sheet detection within the inter-unit transfer system<>• Automatic adjustment according to material thickness.<>• Blanket cylinder equipped with a quick-clamping and tensioning system for<>clamped blankets.<>• Automatic blanket washing system controlled from the Press Pilot console.<>• Remote control of side and front edge register adjustments via the Press Pilot<>console.<>• PPL automated plate exchange system for inserting and removing 0.3 mm thick<>aluminum plates, with separate slots for new and used plates, and position control<>for the plate.<>• Plate cylinder with a quick-clamping mechanism and Graphometronix register<>system.<>• Two-stage pneumatic cylinder engagement: 'blanket/plate' and<>'blanket/plate/impression cylinder'.<>• Power transmission to printing units via a rigid cardan shaft and gears.<>Ink unit<>• Computer-generated 16-roller ink unit.<>• RCI remote-controlled ink unit with linear sliders for precise ink adjustment across<>the sheet.<>• Remote-controlled stable ink dosage monitoring.<>• Constantly rotating ductor roller with an autonomous motor.<>• Reversible motion of the ductor roller.<>• Optimal ink dosage regardless of printing speed.<>• Pre-inking program for the printing plate.<>• Automatic separation of the ink unit during printing stops.<>• Automatic inking roller washing system controlled via the Press Pilot.<>• Smooth adjustment of the oscillation of ink form rollers with different diameters<>during operation.<>• Ink dosage synchronized with the sheet movement in the press, remotely controlled<>via the Press Pilot.<>Dampening unit<>• Roland Deltamatic dampening unit.<>• Stable dampening solution dosage based on ductor roller speed characteristics.<>• Delta effect for removing "hickeys" from the plate.<>• Transfer roller can be integrated or separated for dampening, controlled via the<>Press Pilot.<>• Mechanically adjustable water dosage roller, independent of ductor roller speed.<>• Two friction rollers on the dampening form roller.<>• Additional dampening function, controlled from the console.<>• Cooling and circulation of the dampening solution with automatic alcohol dosing.<>• Ductor roller easily removable for cleaning.<>Reversing device<>• Fully automatic reversing unit, remotely controlled via the Press Pilot.<>• Double-diameter reversing cylinder for printing in either 5/0 or 2/3 configurations.<>• Printable material thickness: 0.04 to 0.6 mm or, with reversing, 0.06 to 0.4 mm.<>• Maximum paper tolerance with reversing: ±1 mm.<>• When printing with reversing, the maximum sheet size is 720 x 1020 mm, maximum<>print area is 700 x 1020 mm, and maximum print speed is 12,000 sheets/hour.<>Delivery<>• High delivery system "AirGlide".<>• Double-diameter delivery drum.<>• Air-supported sheet transport path.<>• Sheet straightener.<>• Sheet brake (vacuum roller) consisting of seven suction wheels with adjustable<>speed.<>• Automatic adjustment of sheet trailing edge limiters and side joggers based on<>sheet size.<>• Pneumatic control for sheet ejection, allowing pre-selection of the number of<>sheets for ejection.<>• Gripper cam adjustment based on material characteristics.<>• Draw frame with tension lines and adjustable axial fans.<>• Weko powder sprayer.<>Lubrication<>• Automatic central lubrication for all critical machine parts.<>• Centralized oil change system for the entire printing press.<>Optional equipment<>• Kersten antistatic devices for feeder and delivery.<>• Automatic cylinder washing devices in the printing units (with brushes).<>• Bacher 2000 register system.<>• Fully automatic plate changing (APL).<>• Combined dampening solution cooling and inking unit temperature control system<>Techotrans beta.c.<>• InlineCoater smart coating unit in the last inking unit (includes dryer at delivery).<>• Deactivatable inking and dampening units.<>• ColorPilot – an automatic system for densitometric measurement and control of<>color.