No | Brand | Model | Size | Location | Age | Price | Tools |
---|---|---|---|---|---|---|---|
330885 | LAMINA | Glueline | 4.000 x 1.000 (4m x 1m) | Europe | 2014 | upon request | show |
Mod. Glueline 675 <> Special to make just boxes of linear folding, folding middle boxes or middle rollers <> Introducer automatic <> Exit by accumulator <> It could work with the following materials: <> Micro or corrugated cardboard with the following thicknesses: F; E; B; EE; EF; EB; FB; C y DD <> Equipped with injectors <> You can paste boxes of maximum development: 4.000 x 1.000 (4m x 1m) <> Minimum: 700 x 500 <> You can paste middle boxes or middle rollers: <> Maximum: 2.000 x 1.000 <> Minimum: 700 x 500 | |||||||
349547 | VEGA | Orion 42 | 420 mm | Europe | 1999 | upon request | show |
Totally overhauled <> Standard machine <> Crash lock and straight line | |||||||
368642 | JAGENBERG | Diana 45-1 | 450 mm | Europe | 1980 | upon request | show |
3 gluing points, <> Lower Disc Gluing System, <> one gluing jet, <> StraightLine <> Double wall | |||||||
367291 | JAGENBERG | Diana 45-2 | 450 mm | Europe | 1992 | upon request | show |
Electronic control incl. counter <> Pre-crushing station with device for pre-crushing the 3rd creasing rule <> Bottom gluing unit 5mm glue disc <> Folding station <> Transfer station <> Pressing device <> Digital position encoder | |||||||
360048 | JAGENBERG | Diana 45-2 | 450 mm | Europe | 1991 | upon request | show |
straight line, lower disc gluing system left, <> pre breaker right and left, kicker, counter, vibrator at feeder, <> minibox folding device, digital readout unit, controlled press station. <> Reconditioning 2022: cleaned, checked, repainted and new feederand <> transport belts. <> StraightLine | |||||||
373224 | BOBST | Ambition 50 A1 | 500 mm | South America | 2009 | upon request | show |
Gluing by disk + BAUMER HHS <> 2 nozzles <> 2 gluing points <> is equipped for straight-line boxes <> Counter <> Maximum cardboard grammage: 800 g/sqm <> Corrugated board: N, F, E <> Maximum Thickness of folded box:12 mm | |||||||
360411 | FIDIA | Combi-Dora 52 | 520x840 mm | Europe | 2000 | upon request | show |
3-point gluing Robatech hot-melt adhesive <> additional second section <> delivery | |||||||
365846 | GRASSI | Studio 60 | 600 mm | Europe | 1998 | upon request | show |
-With pre-folding device <> -Gluing: Automatic Ero cold glue system with 3 spray guns ( 1 for linear and 2 for pre fold boxes as envelopes, bellows boxes or similars ) | |||||||
370944 | KOHMANN | BrailleStar | 620 mm | Europe | 2017 | upon request | show |
Feeder with fibration, <> Braille embossing Servo driven, <> Touchscreen panel, <> Discbortom gluing, <> delvery with pressing section, | |||||||
367277 | JAGENBERG | Diana 65 | 650 mm | Europe | 1989 | upon request | show |
- 3 points gluing , <> - VALCO MCO 4 glue system with 3 guns, <> Crash lock and straight line <> Lock-bottom <> Barcode scanner <> Cleaned | |||||||
371446 | JAGENBERG | Diana 65 | 650 mm | Europe | 1987 | upon request | show |
Mod. Diana 65-1 <> HHS System <> 3 hot melt guns <> 4 cold glue guns <> lower disc glue system <> 3 points <> Overhauled | |||||||
367044 | JAGENBERG | Diana 65 | 650 mm | Europe | 1989 | upon request | show |
Valco MCO -3 guns <> StraightLine | |||||||
360052 | BOBST | Media 68-II (A2) | 680 mm | Europe | 1996 | upon request | show |
electronic upper gluing system HHS, <> 4 channels with 2 guns, <> disc gluing system left, <> Bobst CUBE steering, <> vibrator, pre breaker right and left, <> kicker, <> digital read out units, <> additional upper/ lower middle transport in folding, l <> ock bottom module, <> pneumatic, <> controlled press station. <> Reconditioning 2022: cleaned, checked, repainted, new feeder- and transport belts. <> StraightLine <> Lock-bottom <> Double wall <> Counter | |||||||
370352 | BOBST | Media 68 | 680 mm | USA | 1983 | upon request | show |
Equipped for S/L style cartons with 1st & 3rd pre-break <> 2 carriers in pre-fold section, 3 carriers in folding section <> Lower left glue pot with NEW 3mm wheel, scraper & drive belt <> Counter / kicker, <> compression section (weights) <> Cleaned and checked <> Partly overhauled | |||||||
372619 | BOBST | Media 68 | 680 mm | Europe | 1984 | upon request | show |
StraightLine <> Auto bottom | |||||||
363066 | BOBST | Media 68 | 680 mm | USA | 1990 | upon request | show |
Standard machine | |||||||
358375 | BOBST | Media 68-II (A2) | 680 mm | East Europe | 2003 | upon request | show |
Standard machine | |||||||
372687 | JAGENBERG | Diana 70-2 | 700 mm | Europe | 1997 | upon request | show |
gluing system brand new KQ 3 guns <> high pressure, <> lower disc gluing system left, <> pre breaker right and left, <> pneumatic kicker, <> pneumatic controlled press station. <> StraightLine <> Lock-bottom <> Counter | |||||||
367687 | HEIDELBERG | Easy 100 | 700x1000 mm | Europe | 2008 | upon request | show |
feeder with vibration, <> universally adjustables, <> prefolder, <> lockbottom module, <> upper and lower center carriers, <> transfer section, <> belt assembly, <> compression and delivery station, <> shingled strea, <> delivery, <> glue guns | |||||||
362037 | FIDIA | Combi-Dora 76 | 700x1000 mm | Europe | 1998 | upon request | show |
Fidia Dora 76 <> fully functional, available for testing and complete with spare parts, diagrams and manuals | |||||||
352655 | FIDIA | Combi-Dora 76 | 700x1000 mm | Europe | 2001 | upon request | show |
TIPO G L 76 <> TIPO RACCOGL 76 | |||||||
371324 | HEIDELBERG | Easy 100 | 700x1000 mm | USA | 2017 | upon request | show |
Automatic bottom boxes - cartons or corrugated cardboard (E-flute) up to 600 g / m2 <> Double wall boxes <> Boxes 4- / 6- corners (optional) <> 1.10 Basic Machine <> − Friction feeder with vibrator <> − Pre-bender section <> − Automatic background module <> − Bender section <> − Internal gluing unit LS (4mm glue wheel) <> − Transfer section <> − Mirror for stacking control <> − Departure section <> − Electricity requirement: 18 kW, AC 230 V, 50/60 Hz. Three phase <> − Air requirement: 6-10 bar, base machine 230 Nl / min at 6 bar <> − Touch screen <> − PLC control system <> − Pneumatic marking unit <> − Wireless control module <> OPTIONAL ACCESSORIES INCLUDED <> 2. Options for folding boxes with automatic bottom <> 2.16 3 diagonal left folding (1 long, 1 short, 1 medium) <> 5. Additional machine modules <> 5.20 Alignment module after the feeder <> Logitude: 1,200 mm, 2 bars of upper rollers with device for alignment and support <> guides (3 units) <> 6. Optional equipment for different sections <> 6.07 Milling system <> 6.08 Air blowers for cleaning belts <> 6.09 Brush to clean the feeding belts <> 6.17 Feeder with suction in 4 belts <> 6.18 Nordson gluing equipment with 3 upper injectors | |||||||
370731 | HEIDELBERG | Easy 100 | 700x1000 mm | USA | 2010 | upon request | show |
Standard equipment | |||||||
339622 | FIDIA | Combi-Dora 76 | 700x1000 mm | Europe | 1998 | upon request | show |
with Robatech glue, <> 6 guns, <> hotmelt, <> delivery system for folding <> Hot melt gluing | |||||||
372018 | MOLL | Sprint | 711 x 711 mm | Europe | 2018 | upon request | show |
Especially for the production of DVD box covers, capacity files and other expandable products. <> Able to produce capacity folders of many styles from 1/8” to 3/4” (5 - 19 mm) thickness. <> Comprising:- <> 'Pile Feeder' - air suction pile feeder with integral pump <> SC-2006 - automatic counter with batching <> ‘Sprint’ - box pocket folder - infeed unit with plow formers to single stop plate fold station with spaced rollers. <> ‘Sprint’ - electronic controller with various channels for programming <> ‘Dynatec-Dinamini’ - pre-melt unit with 2 x heated pipes & 2 x hot-melt gluing heads <> ‘Dial-a-Stack’ - shingle delivery table <> Including accessories and manuals. | |||||||
363067 | BOBST | Domino 72 | 720 mm | USA | 1985 | make offer | show |
Standard machine <> Auto bottom | |||||||
371054 | JAGENBERG | Diana 74-1 | 740 mm | Middle East | 2001 | upon request | show |
Belt feeder with 7 belts <> prefold section <> Lower left glue wheel & pot <> Final fold section <> Counter with kicker <> Compression station <> StraightLine | |||||||
370837 | VEGA | 750 | 750 mm | Europe | 1997 | upon request | show |
gluing points(up): 4 <> gluing points(down): 1 <> gluing with disc (4 up and 1 down) <> Crash lock and straight line | |||||||
368644 | VEGA | 750 | 750 mm | Europe | 2009 | upon request | show |
3 gluing points machine | |||||||
364070 | VEGA | 750 | 750 mm | Europe | 1997 | upon request | show |
VEGA 750 + VEGA 6A (4 corners) and Vega collator in delivery | |||||||
368643 | INRAMIK | Vesta 750 | 750 mm | Europe | 2009 | upon request | show |
6 gluing points, <> 3 discs, <> 4 jets, <> Nordson WM408 station | |||||||
373238 | BOBST | Alpina 75 | 750 mm | Europe | 1999 | upon request | show |
Mod. Alpina 75 MOT / A2 <> Rejection module: Flipper ejector feeder with own drive Vibrator at feeder tooth gauge at feeder <> Prebreaker: Left & right <> Lower disc gluing system: <> Left Electronic upper gluing station <> Upper disc gluing system by: Robatec Channels: 8 with 6 guns <> Code reader by: HHS Xtend <> Kicker <> Flipper Additional middle transport in folding station <> Video control in transfer station <> Remote control <> Bobst Cube steering <> Pneumatic press station <> Lock-bottom <> StraightLine <> Double wall | |||||||
351238 | BOBST | Ambition 76 A1 | 760 mm | Germany | 2020 | upon request | show |
CUBE adjusting system <> Carton board: max 800 g/m2 <> Corrugated flute type: N, E, F <> Speed: 20 to 300 m/min <> Inching speed: 20 m/min <> Box sizes: <> Straight line "C": 126 to 760 mm <> Straight line "E": 60 to 800 mm <> Straight line "L": 60 to 385 <> Crash-lock bottom "C" (2): 146 to 760 mm <> Crash-lock bottom "L": 70 to 385 mm <> FEEDER Total length: 610 mm <> 6 Feed conveyors with 30 mm wide belt with 4 built-in mechanical vibrators <> 1 Thickness gauge with lateral and lengthwise setting and upper introduction rollers <> 1 Additional thickness gauge with lateral and lengthwise setting and upper introduction rollers <> 2 Side guides in two parts <> Asymmetrical and adjustable in length <> Max. pile height: 350 mm. <> 1 set of rear guides for blank support <> 1 Motor controlled by frequency variator to drive the feed belts and to put in or out of operation <> PREBREAKER SECTION total length: 2300 mm. <> 1 lower left conveyor with 43 mm wide belt <> 1 Lower right conveyor with 25 mm wide belt <> 1 Set of upper conveyors with 25 mm wide belts and lifting device <> 1 Left-hand prebreaker without belt with built-in pressing device <> Adjustable through eccentric <> Max. width of the glue flap: 30 mm <> 1 Reopening guide <> 1 Right-hand prebreaker with 30 mm belt width <> Including a system to set the prebreaking angle <> 1 Lower central supporting guide <> GLUING UNIT <> 1 Lower left-hand gluing unit with wheel and double scraper <> 1 HHS gluing system with 2 nozzles, upgradeable up to 4 <> 1 Removable glue basin <> 1 Upper guide with pressure roller <> 1 Refill bottle <> Additional options installed (with factory no.): <> A-012 Delivery, extended version <> B-012 Device for crash-lock bottom boxes without prebreaking of 3rd crease <> B-060 Device for sleeves and envelopes <> EA-015 Electric pile vibrator <> For the rear pile guides. Improves the feeding of blanks which are sticking to each other <> EA-025 Blank suction device <> EA-030 Rotary brushes <> F-020 Long upper right conveyor outlet <> G-001 Minimum folding device <> G-015 Central conveyors <> J-001 Infeed device left and right Infeed device with 30 mm belt width <> J-010 Upper pressure belt <> J-014 Additional upper pressing belt <> DX-027 Glue application system without possibility of quality assurance (maximum machine speed 300 m/min) <> K-012 Flipper ejector <> KX-012 Code reader "Stand-Alone" <> Xtend series Baumerhhs (maximum machine speed 700 m/min) <> Dismantled <> In stock | |||||||
372019 | MOLL | Marathon | 762x762 mm | Europe | 1999 | upon request | show |
'Dial-a-Feed' hopper friction feeder with belts <> Infeed table with plough formers & guides <> ‘Tru-Count’ automatic counter with batching <> ‘Quadraplex’ glue control unit with 4 channels for up to 4 gluing heads with electronic cut-off control <> Gluing options of: <> ‘Dynatec’ pre-melt unit with 2 x heated pipes & hot-melt gluing heads or, <> PVA pressurized cold glue unit with 2 x gluing heads <> ‘Marathon’ Pocket Fold unit with; <> Upper & lower buckle plate fold station and segmented rollers <> 'Dial-a-Stack' compression stream delivery conveyor <> Including accessories and manuals. | |||||||
371572 | MOLL | Marathon | 762x762 mm | USA | 2017 | upon request | show |
Friction Feeder <> Marathon Regal w/Dial-a-Feed <> Quadraflex w/compression table <> End-of-Line Collection Table <> Versa Fold & Stacker with Glue System | |||||||
365670 | MOLL | Marathon | 762x762 mm | Europe | 1997 | upon request | show |
Dial-a-Feed' air suction pile feeder with integral pump <> Infeed table with plow formers & guides <> ‘Tru-Count’ Automatic counter with batching <> ‘Quadraplex’ glue control unit with 4 channels for up to 4 gluing heads with electronic cut-off control <> PVA pressurized cold glue unit with 2 x gluing heads <> ‘Marathon’ Pocket Fold unit with; <> - Upper & lower buckle plate fold station and segmented rollers <> ‘Dial-a-Stack’ shingle delivery table <> Also including; <> ‘Bump n Turn’ unit allows the product to be turned & folded in another direction <> ‘Final Fold’ unit creates an in-line final fold in an upward or downward format with rollers & formers <> Including accessories and manuals. | |||||||
366468 | PETRATTO | Metro | 780x780 mm | USA | 2004 | upon request | show |
Standard equipment | |||||||
371525 | PETRATTO | Metro | 780x780 mm | Europe | 2012 | upon request | show |
For the production of a variety of products; <> courier envelopes, <> presentation folders. <> Belt feeder, <> Continuous feeder, <> Peel and seal tape applicator, <> Tear strip attachment, <> Concertina fold, <> Pre breaking ploughs, <> Upper open folder, pocket (tipper), <> Modulo Jolly unit, <> Nordson hot melt glue system, <> Mosquito feeder inserter for CDs, <> Maps, <> Phone cards, etc, <> Cross turn unit, <> Shingle delivery unit | |||||||
372838 | PETRATTO | Metro | 780x780 mm | Europe | 2015 | upon request | show |
This machine is fully equipped to make simple & multiple pocket & presentation straight <> folders/key cards/cd sleeves to & crash lock bottom boxes! <> Touch screen programming <> Petratto bottom fed belt feeder w/ vacuum belts <> GMS hot melt glue system w/ 4 glue guns <> 2 different fold plates for different size presentation folders <> Long 2.5 meter modular table <> Petratto shingle delivery <> 2 double sided tape heads <> Only 1.289.429 total substrates run/436 hours of usage total | |||||||
369871 | PETRATTO | Metro SE 78-2 | 780x780 mm | USA | 2016 | upon request | show |
Mod. Metro SE78A <> Folder gluer for packages & pocket folders, <> upper tipper, <> crash lock device, <> 6 plows with tractors. | |||||||
365845 | GRASSI | Studio 80 | 800 mm | Europe | 1989 | upon request | show |
-Ideal for stretched and corrugated cardboard (up to low wave) <> -With pre-folding device <> -Gluing: with one lower tank and 2 upper wheels for automatic lock bottom or can be installed an automatic HHS hot glue system with spray guns <> -Machine dimensions: length mt. 12 ( without stacker ) - width mt. 1.50 <> -Grassi stacker in delivery | |||||||
366216 | GRASSI | Studio 80 | 800 mm | Europe | 1984 | upon request | show |
Folder gluer GRASSI Studio 80 <> * Completely overhauled <> Gluing stretched, microwave, standard cases and automatic bottom <> Maximum open box size: 800 mm <> Four glue points mod. Zator with 3 spray guns | |||||||
369161 | GRASSI | Studio 80 | 800 mm | Europe | 1995 | upon request | show |
Maximum open box size: 800 mm <> Automatic lock bottom <> Code reader <> Ejector <> Ideal for stretched and corrugated cardboard | |||||||
354179 | BOBST | Domino 85 M | 850 mm | Europe | 1989 | upon request | show |
BOBST Domino 85-M Pasting Machine (Folder-gluer 4-6 points) <> Convertible stock Solid up to 700 g/m2 <> Corrugated cardboard up to B flute <> Max thickness of the finished product: 15 mm <> Sizes: standard boxes (blanks open) Width max 850 mm - Width min 56 mm <> Length max 800 mm - min 60 mm <> Drive System Inching speed 8 m/min <> Operating speed 20 - 400 m/min <> Crash lock bottom device <> Special version for 4/6 corner gluing <> HHS gluing system with 3 guns <> N. 2 gluing points with disc system <> Double belt pressing system on delivery <> Handy Pack system after delivery, available but not installed <> Main motor 21 kW <> Connected power supply 40 kVA / 380V <> Dimensions Length 14120 (15550 mm with Handy Pack) - width 2200 mm | |||||||
366843 | BOBST | Domino 85 M | 850 mm | Asia | 1990 | upon request | show |
4 folder with Lock button <> One Hot-melt Glue <> 2 sets cold glue | |||||||
316633 | JAGENBERG | Simplex Universal 875 | 875 mm | Europe | 1987 | upon request | show |
Model: Simplex Universal 875-2 <> Double handrail <> It can die: cardboard and micro corrugated board <> Completely electrically and mechanically checked <> StraightLine <> Lock-bottom <> 4-Point gluing system | |||||||
371101 | BOBST | Domino 90 | 900 mm | Europe | 1986 | upon request | show |
Ca. 37.500 hours <> Vibration motor at feeder <> Counter kicker after trombone section <> Compression section <> including blue sponge belt <> Gluing disc – Bobst <> 2 glue guns for crash lock. <> Of which 1 NEW gun <> as well as hooks and gluing guns for crash lock bottom <> Full documentation with spare parts, maintenance manual, <> electric diagram <> StraightLine | |||||||
366251 | BOBST | Domino 90 | 900 mm | Europe | 1990 | upon request | show |
equipped with frame with upper glue wheels <> StraightLine <> Cleaned and checked | |||||||
358320 | BOBST | Domino 90 | 900 mm | Europe | 1995 | upon request | show |
Fixings - 15 pcs. <> Extension rods - 15 pieces (different lengths) <> Stacking supports - 2 pieces <> Terminal blocks (with adjustable angle) 10 pcs. <> Upper bars - 4 pcs. <> Lower poles - 2 pcs (one for each section) <> Assembly screws (for fastening the elements on the assembly line) - 4 pcs. <> Wires (for bending the punched panels) - 4 pcs. <> Folding knife - 3 pieces (left and right for folding and right for pre-breaking) <> Adhesive flap bender on the left <> Lower adhesive system with wheel 3mm thick (adhesive wheel, collector, inkwell, cylinder and cover with upper pressure wheel) <> 5 cranks for machine setting <> Conveyor belt tensioner <> Conveyor belts - for most trolleys 1-3 each | |||||||
362789 | BOBST | Domino 90 | 900 mm | Europe | 1995 | upon request | show |
Glue system KAS 800 with 3 glue guns <> Kicker <> Straightline gluing <> Delivery |