Non | Marque | Modèle | Taille | Emplacement | Âge | Prix | Outils |
---|---|---|---|---|---|---|---|
373289 | BOBST | SP 102-CER | 720x1020 mm | Europe | 1999 | upon request | montrer |
Spare cutting chase <> 3 x 5mm steel plates <> 1 x 4mm steel plate <> 100 x 1mm stainless plates <> Stripping station <> Blanking station | |||||||
373286 | BOBST | SP 102-BMA | 720x1020 mm | USA | 1987 | upon request | montrer |
OS (operator side) and OOS (opposite operator side) pull guides <> 16 heating zones <> Foil break detection system <> 3 foil advance shafts pull system <> One (1) honeycomb chase <> One (1) embossing plate <> One (1) lower supporting plate <> One (1) diecutting chase <> One (1) diecutting plate <> Double action waste stripping station <> One (1) upper and one (1) lower stripping frame with crossbars and stripping pins <> Automatic on/off impression <> External foil brush removal device <> Operator platform (all safety guards included) <> Extra set of 7 gripper bars with a set of chains <> All Bobst parts books and manuals <> Elevated Machine <> Non-stop in feeder + delivery | |||||||
373263 | BOBST | Novacut 106-E | 740x1060 mm (29.125x41.75 in) | South America | 2012 | upon request | montrer |
Stripping station | |||||||
373239 | BOBST | SP 126 BMA | 1260x920 mm | Europe | 1992 | upon request | montrer |
DWELL SYSTEM- , <> Autoplaten concept , <> Quick-lock system in cutting chase , <> 2 Frame and Chase , <> HOT FOIL SYSTEM , <> All books, <> Manuals and Tools <> Stripping station <> Quick lock <> Non-stop in feeder + delivery <> Elevated Machine <> Make-ready table | |||||||
373139 | HEIDELBERG | Dymatrix 145 CSB | 1450x1060 mm | Europe | 2013 | upon request | montrer |
At 300 mm in height with Pallet change logistics system on the feeder and delivery <> Pallet change logistics system on the feeder and delivery <> Register System <> Electronically controlled sheet brake <> Mechanical double-sheet control <> Feeder table <> Ultrasonic double-sheet control <> Die cutting station <> Motorized die cutting pressure adjustment <> Quick lock chase <> Manuals and tools <> Stripping station <> Blanking station <> Non-stop in feeder + delivery | |||||||
373137 | BOBST | SP 102-E | 720x1020 mm | Europe | 1998 | upon request | montrer |
Mod. SP 102 EII <> Non-stop manual feeder with 18mm infeed bars, <> mechanical pull, <> standard front margin. <> Micrometric adjustment and quick lock upper chase in the platen section, <> stripping section with upper and lower frames and spare frames, <> Non-stop in delivery | |||||||
373127 | BOBST | SP 1260-E | 1260x920 mm | USA | 1972 | upon request | montrer |
with Eagle Foil System | |||||||
373112 | IBERICA | DG 60 | 860x1140 mm | Europe | 1982 | upon request | montrer |
Standard equipment | |||||||
373095 | BOBST | SP 130-ER | 720x1030 mm | Japan | 2000 | upon request | montrer |
Mod. SP 130 SER <> Stripping station <> Blanking station <> Double action stripper | |||||||
373094 | HEIDELBERG | Dymatrix 106 CSB | 760x1060 mm | Japan | 2012 | upon request | montrer |
Mod. DYMATRIX 106/113 PRO CSB <> Stripping station <> Blanking station | |||||||
373091 | HEIDELBERG | Promatrix 106 CS | 760x1060 mm | Europe | 2019 | upon request | montrer |
Mod. Promatrix 106 CSB <> Stripping station <> Blanking station <> Non-stop feeder | |||||||
373035 | BOBST | SP 104 BM | 1040x740 mm | Europe | 2016 | upon request | montrer |
Honeycomb Chase, <> Die Cutting Chase, Hard Plates, <> CUBE II Colour Screen, <> Quick Chase changer for Die Cutting & Honeycomb chase, <> Sensor-less double Sheet Detector, <> Foil Break Control for 8 Foils, Stripping Station for Die Cutting, <> Centerline for quick Job Changeover, Sheet Hold-Down Device, <> Heated Upper Head w/ 12 Independent Heating Zones, <> Reel Holder w/ 1” Hub for Foil Driving Device, <> Reel Holder w/ 3” Hub for Foil Driving Device, <> Control Table with Light, | |||||||
373032 | BOBST | Spanthera 106 LE | 1060x760 mm | Europe | 2006 | upon request | montrer |
Elevated machine II <> Presetting table <> Strpping frames + Chases and Plates <> Automatic gripper opening system at stripping station <> chase chnager <> sheet breaking device using Bermoulli system at stripping station <> upper chase wih quick locking; fixed bottom plate <> Platform extension with gangway <> Antistatic device <> device for high speed diecutting <> additional equipment for chase blwoing device <> Stripping station <> Photocells <> Double-sheet control | |||||||
373031 | BOBST | Spanthera 106 LER | 1060x760 mm | Europe | 2007 | upon request | montrer |
Automatic Die Cutter with strippping and Blanking <> Micro metric adjustment <> Automatic equipment centering, locking for chase and supporting plate, ensuring perfect quality achievement of cutting and creasing <> 1 x upper striping frame with accessorie <> Stripping Unit with 2x upper chases and 2x lower chases <> Integrated quick-lock system ensuring fast and easy job changeovers <> Left hand side register pull lays <> CUBE (central unit bobst electronics) <> Stripping section <> Centerline micrometric adjustment <> C.U.B.E. Bobst-Electronic machine operating system <> Pull guide (OS) with Double Sheet Detector <> 1 x Lower stripping frame with some accessories | |||||||
372995 | BOBST | SP 102-BMA | 720x1020 mm | Europe | 1992 | upon request | montrer |
3 shafts <> 16 heating zone <> 1 honey comb and 1 steel plate <> Non-stop in feeder + delivery | |||||||
372994 | YAWA | MW 1050 A | 1050×750 mm | Europe | 2004 | upon request | montrer |
Sidelays <> Front lays <> Chase & Plate <> Stripping Equipment <> Stripping station <> Non-stop in feeder + delivery | |||||||
372993 | IBERICA | JRK 105 | 1050x750 mm | Europe | 2001 | upon request | montrer |
Micrometric Adjustment <> cardboard to 1.5mm <> Corrugated board to 3mm <> Fully Automatic Pallet Change System <> Stripping station <> Blanking station | |||||||
372984 | BOBST | Spanthera 106 LER | 1060x760 mm | USA | 2006 | upon request | montrer |
• Elevated machine 40cm <> • (2) die cutting chases <> • Micro adjustment for 1mm thin plates <> • (2) cutting plates <> • (1) upper stripping frame <> • (1) lower stripping frame <> • Lower pull-out system <> • Chase changer <> • Assortment of stripping bars, pins and holders <> • OS and OOS side lays <> • CAM driven platen section <> • Lateral registration system <> Quick lock <> Non-stop in feeder + delivery <> Stripping station <> Blanking station | |||||||
372978 | BOBST | SP 102-CER | 720x1020 mm | Europe | 1988 | upon request | montrer |
Direct pallet loading <> Automatic Universal feeder with non stop facility <> Motorised feeder settings <> Adjustable feed table with complement of infeed table furniture <> Front lay system <> Left hand side Register lay <> Micrometric adjusting thin plate system <> Centre Line <> Binder sheet insertion <> Automatic removal of completed pile <> Belt for removal of residual waste <> Quick-lock stripping and blanking <> Blanking station <> Double action stripper <> Elevated Machine | |||||||
372977 | BOBST | SP 102-CER | 720x1020 mm | Europe | 1988 | upon request | montrer |
Direct pallet loading <> Automatic Universal feeder with non stop facility <> Adjustable feed table with complement of infeed table furniture <> Front lay system <> Left hand side Register lay <> Micrometric adjusting thin plate system <> Centre Line <> Binder sheet insertion <> Automatic removal of completed pile <> Belt for removal of residual waste <> Quick-lock stripping and blanking <> Blanking station <> Double action stripper <> Elevated Machine | |||||||
372965 | BOBST | SP 102-BMA | 720x1020 mm | USA | 1987 | upon request | montrer |
Hoeycomb chase | |||||||
372958 | BOBST | SP 142-ER | 1020x1420 mm | Europe | 1984 | upon request | montrer |
- Push Lay system <> - Non-Stop Feeder with manual change over bars <> - Non-Stop Delivery <> - Corrugated board feeder <> - Quick locking Tooling in Stripper <> - Micrometric system <> Stripping station <> Blanking station | |||||||
372957 | BOBST | SP 104 ER | 1040x740 mm | Europe | 1998 | upon request | montrer |
- Manual non-stop infeed <> - Quick lock in cutting chase/stripping-and blanking section <> - Chase loader <> - Two cubes <> - Easy transfer <> Elevated Machine | |||||||
372933 | SANWA | TRP 1060-SE | 1060x740 mm | Europe | 2006 | upon request | montrer |
Mod. TRP 1060 SE II <> Stripping station | |||||||
372927 | BOBST | SP 1300-ER II | Korea (Republic of) | 1998 | upon request | montrer | |
Stripping station <> Blanking station | |||||||
372899 | TMZ | EST 105 | 750x1050 mm | Europe | 2002 | upon request | montrer |
With heating plate for die-cutting plastics <> Side register (on both sides) <> Overhauled | |||||||
372888 | HEIDELBERG | Easymatrix 106 CS | 750x1050 mm ( 29.50" x 41.30" ) | Europe | 2017 | upon request | montrer |
Complete with : <> - Steel sheet in feeder <> - Vacuum belt infeed with full complement of infeed table furniture <> - Left and Right hand side register lays <> - Thin plate system with micrometrics <> - Centreline <> - 1 x chase plus 1 x reportedly damaged chase <> - 2 x sets of stripping frames, one with Quicklock <> - Air assisted delivery, <> Non-stop in feeder + delivery | |||||||
372871 | BOBST | SP 126 E | 1260x960 mm (49.61x36.22") | South America | 1963 | upon request | montrer |
With Automatic Discarding and Estamping! <> Eagle equipment with 10 heat zones, Model 4900. <> With pusher frog for Micro corrugated | |||||||
372870 | BOBST | SP 126 E | 1260x960 mm (49.61x36.22") | South America | 1980 | upon request | montrer |
Eagle with 12 heat zones, Model 4900 MRI. <> With pusher frog for Micro corrugated. <> Honeycomb. <> Different feed lengths. <> Coil-holding shafts | |||||||
372869 | BOBST | SP 102-SE | 720x1020 mm | South America | 1995 | upon request | montrer |
Automatic cutting and discarding machine. <> (1 station). <> Pre-setting + pre-registration for punching and cutting and discarding station. <> Non Stop infeed. <> Steel plates in feeder | |||||||
372850 | SBL | 1050 SE | 750x1050 mm (29 1/2" x 41-1/4") | USA | 1998 | upon request | montrer |
Mod. 1050 SEH <> Die Cutting and Embossing Station with Heated Platen <> Stripping station | |||||||
372809 | RABOLINI | Imperia | 850x1200 mm | USA | 1985 | upon request | montrer |
embosser and foil stamper with Autofeed | |||||||
372726 | BOBST | SP 126 E | 1260x960 mm (49.61x36.22") | USA | 1982 | upon request | montrer |
Extra Honeycomb chases, <> Pulls, <> Die cutting chases <> Die Cutter, <> Foil Stamping & Embossing | |||||||
372714 | BOBST | SP 76-E | 760x560 mm | Europe | 2006 | upon request | montrer |
Non stop feeder <> Elevated <> Stripping station <> Stripping frames <> Center Line <> Control panel <> All manuals | |||||||
372651 | BOBST | SP 130-ER-II | 920x1300 mm | Europe | 1999 | upon request | montrer |
Micrometric Adjustment <> Continuous Delivery <> Stripping station <> Blanking station | |||||||
372623 | BOBST | SP 102-E | 720x1020 mm | Europe | 1998 | upon request | montrer |
Mod. SP 102-EII <> Stripping station | |||||||
372609 | BOBST | SP 102-E | 720x1020 mm | USA | 1980 | upon request | montrer |
Automatic feeder with steel sheet <> Complement of infeed table furniture <> Left hand side register lay <> Micrometric adjusting thin plate system <> Centre – line <> Quick lock system in stripping station <> Cube control system <> One chase, two upper / lower stripping frames, complement of stripping bars, pins and 1mm thin plates. <> Double action stripper <> Non-stop in feeder + delivery <> Elevated Machine <> Quick lock | |||||||
372576 | BOBST | Expertcut 106 | 760x1060 mm | Europe | 2019 | upon request | montrer |
With gripper margin <> Triple wall Batch height Feeder | |||||||
372557 | BOBST | SP 1300-ER II | Korea (Republic of) | 1999 | upon request | montrer | |
Stripping station <> Blanking station | |||||||
372535 | BOBST | SP 76-E | 760x560 mm | Europe | 2000 | upon request | montrer |
Active Front lays <> Left Hand Sidelay <> CUBE Touch screen Computer <> 2 Chases <> 1mm Cutting Plates <> Chase Changer <> Micrometric Adjustment <> Stripping Station <> Stripping Make Ready Table <> 7 Quick Lock Stripping Frames <> Non Stop Feeder <> Non Stop Delivery Curtain <> Steel Plate Delivery <> Manuals | |||||||
372521 | BOBST | SP 76-E | 760x560 mm | Europe | 2000 | upon request | montrer |
- Automatic feeder <> - Steel sheet in feeder <> - Left hand side Register lay <> - Micrometric adjusting thin plate system <> - Centre - line <> - Chase changer <> - Double action stripping <> - Cube control system <> - Steel sheet in delivery <> - Stripping pre MAKE ready table <> - 2 x chase <> - 1 x 4mm cutting plate <> - 1 x upper stripping frame with Quicklock <> - 6 x lower stripping frames <> - Complement of stripping bars and pins <> Non-stop in delivery | |||||||
372510 | BOBST | SP 102-E | 720x1020 mm | Asia | 1986 | upon request | montrer |
Stripping station | |||||||
372485 | BOBST | SPO 1600 | 1600x1100 mm | Europe | 1989 | upon request | montrer |
372424 | BOBST | SP 103-ER | 720x1030 mm | Europe | 1994 | upon request | montrer |
Micrometric system <> Centerline <> 1 chase <> 2 cutting plates 1mm. <> 1 cutting plate 4 mm. <> Side lay on operator side <> Elevated 350 mm. <> Stripping station <> Blanking station <> Non-stop in feeder + delivery | |||||||
372387 | BOBST | SP 142-E | 1420x1020 mm | Europe | 1981 | upon request | montrer |
Push and Pull Lay options to suit solid board and Corrugated board <> Left hand pull lay <> 4 front lays <> Centerline <> 1mm cutting system <> Spare chase and spare plate <> Non-stop in feeder + delivery <> Double action stripper | |||||||
372386 | BOBST | SP 142-ER | 1020x1420 mm | Europe | 1981 | upon request | montrer |
Non stop Margin, <> Centerline, <> 1mm Platinum Plate, <> Two Shaped Frames, <> Die Cut Station, <> Waste conveyor <> Stripping station <> Delivery | |||||||
372352 | IBERICA | JR-105 | 750x1050 mm | Europe | 1994 | upon request | montrer |
Centerline <> Varioplan <> Stripping station | |||||||
372351 | BOBST | SP 102-SE | 720x1020 mm | Europe | 1992 | upon request | montrer |
Stripping station | |||||||
372337 | BRAUSSE ETERNA | 1050 SE | 1050x750 mm | New Zealand | 2006 | upon request | montrer |
Pull lay <> Push lay <> Cutting chase / Plate <> 2 x Die chases <> 2 x top and bottom stripping chases <> 2 x 5mm cutting plates ( 1 for each machine) <> 1 x 4mm cutting plate ( 1 shared between machines) <> Continuous feeder and delivery <> Stripping station | |||||||
372318 | IBERICA | DG 60 | 860x1140 mm | Europe | 1979 | upon request | montrer |
Equipped with pickling. <> In the reconstruction, <> virtually only the frame has been reused; <> everything else; <> mechanics, electrics and electronics are all new. <> Equipped with PLC <> Overhauled |