Offer 376067, a BOBST SPANTHERA 106 LE from 2008

- Optical Register Sheet Infeed System ORSIS (Optical Register Sheet Infeed synchronisation).<>- Platen with camshaft drive.<>- Machine compatible with HIGHWAY TDF-VIEW system.<>- Centreline system for fast job changes.<>- Electronic sheet flow control.<>- Adjustable centring on the stripper.<>- Control cabinet air conditioning.<>- Several automated functions to assist the machine operator including<>- Controlled machine stop after system error (allows the sheets in the machine without interruption).<>- Feeding of a sheet from the feeder into the stripping station for control of the die-cutting / creasing.<>- Feeding a sheet into the stripping station to check the tool position, if necessary.<>- Programmed stop of the machine for changing the equipment<>- Bobst-Electronic machine operating system C.U.B.E. ll (Control Unit Bobst Electronic) with colour screen.<>- Main drive by frequency-controlled asynchronous motor<>- The ORSIS optical infeed system includes:<>- Independent feeder controlled by electric shaft.<>- Optical side register control.<>- Automatic lateral stack correction (+/- 40 mm) controlled by the optical side register.<>- Automatic synchronisation device for optimum positioning of the sheets to the front lays.<>- Deceleration device with electronic control (3<>speeds for feeding the sheets to the front lays).<>- Stepless stroke of the pile support plate to maintain a constant pile height.<>- Adjustable side blower .<>- Suction head with multiple adjustment options.<>- Optical side register control, without sheet contact, with large correction range in both directions (+/- 10 mm).<>- A camera aligns the sheets laterally according to the sheet edge or the print image.<>- Allows the alignment of all materials (paper, solid board, laminated corrugated board).<>- Coated with a stainless steel sheet, with antistatic effect.<>- Introduction to the feed table with side ramps.<>- 4 x Individually adjustable front lays with sheet control during production.<>- Control system by fibre optics<>- Double sheet control without contact.<>- Sheet hold-down device (guiding the sheets to the grippers).<>- Upper feed table frame with manual lifting aid.<>- Upper transport equipment for paper and cardboard.<>- 2 x transport belts.<>- With lateral guide and automatic clamping system.<>- Movable platen with short stroke and cam drive.<>- Cam-controlled platen movement allows a sheet transfer with low acceleration and deceleration.<>- Platen with constant parallelism over the entire pressure range.<>- Upper platen with vacuum.<>- Gripper reopening device.<>- Automatic centring and locking of the closing frame and the base plate.<>- Adjustable centring for base plate (+/- 0.9 mm).<>- Locking of the clamping frame against the upper platen.<>- Measuring the punching force with tension gauge.<>- Motorised adjustment of the punching force.<>By push button.<>- Support plate made of synthetic material.<>12 mm thick.<>- A set of 5 x thin plates, thickness 1 mm<>- 1 x Upper quick-action clamping frame: screwed base plate (E-3)<>- Base plate, 2 mm thick, with a synthetic lashing protection plate,1 mm thick.<>1 x levelling plate (E-5) 4 mm thick. This ground steel plate is designed for the use of thin punching plates. Advantageous for repeat orders.<>- Stripping station with:<>- Centre drawer frame with quick clamping.<>- BSSR - Upper quick clamping frame.<>- Integrated quick-clamping device for a finished upper stripping tool.<>- Adjustable centring for the upper, middle and lower stripping tool.<>- 1 x Fixing material for the upper stripping mould for quick clamping<>Allows the attachment of a wood stripping mould in the upper quick clamping device<>- integrated upper quick-clamping device.<>1 x Fastening material for the stripping board on the centre frame with quick clamping<>1 x Lower drawer frame<>1 x Lower stripping equipment<>- Waste stripping equipment with support rods and telescopic pins.<>Delivery Section includes:<>- Pallet support plate.<>- Pneumatically controlled front and side straighteners.<>- Rear and side straighteners with centreline markings adjustable.<>- Continuous stack lowering with minimum/constant drop height onto the stack.<>- Brake brush.<>- Motorised, the contact pressure and angle position can be adjusted via the C.U.B.E.<>The mode of operation is automatic, it adapts to the machine speed.<>- Simple adjustment via the digital display enables the brush and the positioning of the brush and tray according to the sheet length.<>- Blower sheet down holder controlled by C.U.B.E.<>Allows accurate stacking of sheets for light grammages and paper.<>- Manual non-stop rake.<>- Photocells to check whether sheets are outside the grippers