Offer 378330, a GMA QUATRO NORIA from 2008

Label Punching Machine <> Flanging and assembling line<> GMA QUATRO 1611-22 flanging machine in-line with GMA NORIA 1213-35 assembling machine<> 4 punching mandrels (segments)<> various template diameters available<> shaping and gluing equipment including collar<> single-point gluing with Nordson hot melt adhesive<> manufacturer GMA CE, France<> flanging machine GMA QUATRO 1611-22 operation options:<> MANUAL OPERATION:<> having supplied the magazines with pre-cut blanks<> adjusted the flanging machine on the required box height<> set the disconnecting with handle on I on the side of the cabinet<> to open the lockable air disconnecting switch<> position the key button "automatic/manual" on "manual"<> press on the push-button "reset"<> wait until the heating temperature is reached<> the flanging machine is set into operation : blue light : flickering - fixed<> press on the green button "general ON / OFF"<> the setting into operation of the flanging machine may be carried out either on the cabinet with the push-button<> "stroke/stroke" or from the manual control casing where it is also possible to start the "stroke/stroke" operation<> AUTOMATIC OPERATION<> proceed in the same way as for the manual operation up to the phase "heating temperature standby"<> set the belts into operation using the button "belt ON/OFF" located on the cabinet of the assembling machine<> position the key button "automatic/manual" on automatic<> press on the green button "flanging machine general ON/OFF"<> the flanging machine is set into automatic operation