Die-cut sections 2<>Cutting sections in sheet 1<>The thickness of the mold is 1.14 mm<>The thickness of the adhesive tape is 0.38 mm<>Gear pitch 1/8 cp<>Equipment<>Roll charging (unwinding) for rolls up to 1000 mm in diameter. With a vertical dancer (floating shaft) and a feedback tension control system.<>76 mm spindle on charge<>The alignment of the canvas is automatic<>Web tension control system<>8 flexographic printing sections<>360° motorized longitudinal drive of the printing sections<>Servos of the printing sections<>Automatic longitudinal drive of printing sections and die-cutting sections.<>8 GEW VCP UV Dryers, 200 W/cm with e-Brick power supplies<>2 die-cutting sections and 1 cutting section in a sheet with servos.<>The Spilker MicroGap die-cutting gap adjustment system<>Winding of the chip for rolls up to 812 mm.<>Spindle 76 mm<>Roll acceptance of finished products (winding) for rolls up to 1000 mm in diameter.<>Spindle 76 mm<>A cold foil stamping or lamination system, movable between sections.<>VS-4s video monitoring with a camera (Russia)<>Coronator (Russia)<>A device for mounting molds with cameras.<>Anilox<>cubic meter/cm l/cm qty<>3,1 400 8<>4,0 400 1<>4,5 340 1<>5,0 340 1<>6,5 220 1<>7,5 160 1<>7,5 180 1<>7,7 170 1<>10 80 1<>12 100 1<>15 80 1<>MANUFACTURER: HARPER, ZECHER, CHESHIRE<>Shaped and magnetic cylinders<>RotoMetrics shaped cylinders<>SHAFT (Z) Quantity (pcs.)<>Z58 8<>Z71 8<>Z90 5<>Z96 12<>Z110 8<>Z127 8<>Magnetic RotoMetrics Cylinders<>Z58<>Z71<>Z96<>Z110<>Z127