Continuous automatic feeding with pre-loading;<>• High-speed automatic feeding with a maximum speed of 108 sheets per minute;<>Four pneumatic suction cups, adjustable for height and angle;<>• Three electronic safety sensors prevent the platen from being raised excessively;<>• Side air-blow system to enhance sheet separation;<>Double-sheet detector;<>• Four front rollers: two fixed and two movable, controlled by a worm<>drive for different paper formats;<>Automatic emergency stop system in the event of a sheet jam;<>Separate drives for the automatic feeder section and the entire machine facilitate easy set-up;<>LCD display and camera for controlling the machine’s synchronisation;<>Four brush rollers for thin paper;<>10 distribution blades for thick cardboard;<>• 30 distribution blades for thin paper;<>Fine-tuning of the cutting force via a servo motor worm drive;<>• Axial shaft made of 40Cr steel;<>• Upper and support plates made of QT60 malleable cast iron;<>• Precise positioning of the closing frame, ensured by photoelectric sensors;<>• Closing frame rotation mechanism;<>• Gearbox cooling and lubrication system;<>• Overload protection device with a torque limiter ensures the highest<>level of safety during operation;<>• Universal frame – 1 pc;<>• Pneumatic pump manufactured by Becker (Germany) – 1 pc;<>• Plates: 5.00 mm – 1 pc., 3.00 mm – 1 pc. and 1.5 mm – 4 pcs.;<>• Pneumatic clamping and release mechanism for the end frame;<>• Chain pulling mechanism (UK);<>• Patented instantaneous mechanism<>Hot foil stamping section<>• 4 individually controlled foil rollers, servo-driven;<>• 20 individually controlled heating zones with a tolerance of +/-5 °C;<>• Patented foil tension control device, ensuring a stamping accuracy of +-0.2<>mm;<>• 9 electronic foil breakage sensors;<>• Computer with an industrial-grade LCD monitor;<>• Information displayed on the LCD monitor regarding the foil feed position (in English);<>• One software package (in English);<>• 1 honeycomb frame with 160 clamps for securing the printing plate.<>Delivery section<>• Continuous receiving system with two wooden stops;<>• Safety photoelectric sensors prevent the paper pile from becoming overfilled or underfilled at the delivery section;<>• Production counter;<>• Brushes with adjustable angles