Die Cutting Chase,<>Cutting Plate, <>Upper and Lower Stripping Frames with Tooling, <>Operator Side Guide Push/Pull, <>Max. 300 Tons Pressure<>-Wide feeding range from 400x370mm <>-Non-stop device for feeder and delivery station allows for continuous production.<>-Double sheet and front lay register device for proper sheet calibration.<>-Push and pull (2-in-1) side guide device for quick changeovers.<>-Seven (7) high strength alloy gripper bars with specially designed gripper bar fingers which open simultaneously. Each gripper bar is also equipped with a registration adjustment system.<>-Touch screen monitor with computerized self-diagnostic system is easy to operate and helpful for troubleshooting each section.<>-Cutting pressure can be adjusted manually according to the stock requirements up to a maximum pressure of 300 tons.<>*Various stock cutting range from light paper to B-flute.<>-Special double action stripping device and gripper edge device for easy waste removal.<>-The brush and jogger device in delivery station for proper pile alignment.<>-Stripping section with center line system and registration system<>Stripping station<>Non-stop in feeder + delivery