Die-cutting press with foil device<>Feeder and flow table<>•⁠ ⁠Non-stop feeding system.<>•⁠ ⁠Feed head with lifting and feeding suction cups and multiple adjustment options.<>•⁠ ⁠Double sheet detector.<>•⁠ ⁠Feed head height adjustment.<>•⁠ ⁠Extensive air and mechanical separation.<>•⁠ ⁠Side air vents.<>•⁠ ⁠Electric lateral stack plate adjustment.<>•⁠ ⁠Cover frame with position lock.<>•⁠ ⁠Quick roller and brush adjustment on a common support.<>•⁠ ⁠Two side lays with "push" or "pull" operation.<>•⁠ ⁠Device to slow down the sheet when reaching the front lays.<>•⁠ ⁠Precise adjustment of side and front lays.<>•⁠ ⁠Sheet transport synchronization adjustment.<>•⁠ ⁠Registration control.<>Die-cutting and embossing section<>•⁠ ⁠Lower platen drive system with four support arms and a worm gear.<>•⁠ ⁠Pressing force up to 300 tons.<>•⁠ ⁠Automatic presser start/stop system.<>•⁠ ⁠Frames with attached top plate.<>•⁠ ⁠Die-cutting centering system.<>•⁠ ⁠Aluminum cover plate.<>•⁠ ⁠5 mm die-cutting plates.<>Hot foil stamping and embossing section<>•⁠ ⁠12-zone upper heating plate with individual temperature control (touchscreen).<>•⁠ ⁠One honeycomb plate.<>•⁠ ⁠6-roller waste foil rewinder with individual "dancing" arms.<>•⁠ ⁠Dual blower: separates and smooths sheets. • Dual-roller foil feed unit (individually programmable).<>•⁠ ⁠Foil feed rollers: 2 (optional 3, 4, 6).<>•⁠ ⁠Max. foil roll diameter: Ø220 mm.<>•⁠ ⁠Used foil winding rollers: 6, max. Ø400 mm.<>•⁠ ⁠Maximum embossing area: 710 x 1020 mm.<>•⁠ ⁠Number of heating zones: 12.<>•⁠ ⁠Temperature control range: 0–180 ºC.<>Delivery section<>•⁠ ⁠Non-stop delivery system with automatic roller shutter.<>•⁠ ⁠Front edge removal device after delivery.<>•⁠ ⁠Steel stack support plate.<>•⁠ ⁠Separation strip inserter with programmable counter.<>•⁠ ⁠Brush sheet brake.<>•⁠ ⁠Pneumatic sheet clamping system.<>General machine equipment<>•⁠ ⁠Large "Cat-Walk" platform for easy access to components.<>•⁠ ⁠Sheet inspection table with overhead lighting.<>•⁠ ⁠Machine elevation for higher stacks.<>Additional equipment (for Totem)<>•⁠ ⁠Additional honeycomb die mounting plate.<>•⁠ ⁠Rotary honeycomb die/frame changer.<>•⁠ ⁠Platform enlargement/improvement.<>•⁠ ⁠Kersten antistatic unit.<>•⁠ ⁠Lower heating plate with temperature control.